Installing the Apr Elantra N Turbo Upgrade: a Complete Step-by-step Guide

by

The APR Elantra N Turbo Upgrade is an exciting modification for enthusiasts looking to enhance the performance of their vehicle. This guide provides a comprehensive step-by-step process to help you successfully install the upgrade.

What You Will Need

  • APR Elantra N Turbo Upgrade Kit
  • Basic hand tools (screwdrivers, wrenches, etc.)
  • Torque wrench
  • Safety glasses and gloves
  • Vehicle jack and stands

Preparation Steps

Before starting the installation, ensure that you have all the necessary tools and parts. Follow these preparation steps:

  • Read the APR installation manual thoroughly.
  • Park your vehicle on a flat surface and engage the parking brake.
  • Disconnect the battery to prevent any electrical issues.

Step 1: Remove the Stock Turbocharger

To begin the installation, you need to remove the stock turbocharger. Follow these steps:

  • Locate the turbocharger in the engine bay.
  • Disconnect the intake and exhaust pipes connected to the turbo.
  • Unbolt the turbocharger from its mounting points using the appropriate tools.
  • Carefully remove the turbocharger from the engine bay.

Step 2: Install the APR Turbo Upgrade

Now that the stock turbocharger is removed, it’s time to install the APR Turbo Upgrade. Follow these instructions:

  • Place the APR turbocharger in the mounting position.
  • Secure the turbocharger with the provided bolts and ensure they are torqued to specifications.
  • Reconnect the intake and exhaust pipes, ensuring a tight fit.

Step 3: Reconnect Electrical Connections

After installing the turbocharger, reconnect any electrical connections that were detached during the removal process:

  • Locate the electrical connectors for the turbo.
  • Plug them back into their respective sockets.
  • Ensure that all connections are secure and free from damage.

Step 4: Reconnect the Battery

Once everything is installed and connected, reconnect the battery:

  • Reconnect the negative terminal first, followed by the positive terminal.
  • Ensure that the battery connections are tight and secure.

Step 5: Final Checks

Before starting the vehicle, perform these final checks:

  • Verify that all tools are removed from the engine bay.
  • Check for any loose connections or leaks around the turbocharger.
  • Ensure that all bolts are tightened to the specified torque settings.

Step 6: Start the Engine

With everything in place, it’s time to start the engine:

  • Turn the ignition key to start the engine.
  • Listen for any unusual noises that may indicate a problem.
  • Allow the engine to idle for a few minutes to ensure proper operation.

Step 7: Test Drive

After confirming that the engine is running smoothly, take your vehicle for a test drive:

  • Start with a short drive around the block.
  • Gradually increase speed to test the turbo performance.
  • Monitor the vehicle for any warning lights or unusual behavior.

Troubleshooting Tips

If you encounter issues during or after installation, consider the following troubleshooting tips:

  • Check all connections to ensure they are secure.
  • Inspect for any signs of leaks around the turbocharger.
  • Consult the APR manual for specific error codes or troubleshooting steps.

Conclusion

Installing the APR Elantra N Turbo Upgrade can significantly enhance your vehicle’s performance. By following this step-by-step guide, you can ensure a successful installation and enjoy the benefits of your new turbo upgrade.