Table of Contents
The installation of the ARMA Performance Turbocharger on the S63 can significantly enhance your vehicle’s performance. This step-by-step review will guide you through the entire process, ensuring that you achieve optimal results.
Tools and Materials Required
- ARMA Performance Turbocharger kit
- Socket set
- Torque wrench
- Screwdrivers (flat and Phillips)
- Wrenches
- Pliers
- Gasket sealant
- Oil catch pan
- Shop towels
- Safety goggles and gloves
Preparation Steps
Before starting the installation, it’s crucial to prepare your workspace and vehicle. This ensures a smooth process and minimizes the chances of errors.
- Park the vehicle on a flat surface and engage the parking brake.
- Disconnect the battery to prevent any electrical issues.
- Allow the engine to cool completely before beginning the installation.
- Gather all tools and materials to have them readily available.
Removing the Stock Turbocharger
The first major step is to remove the stock turbocharger. Follow these instructions carefully to avoid damaging any components.
- Remove the engine cover by unscrewing the bolts securing it in place.
- Disconnect all electrical connectors attached to the turbocharger.
- Remove the intake and exhaust pipes connected to the turbocharger.
- Unscrew the bolts holding the turbocharger to the manifold.
- Carefully lift out the stock turbocharger, ensuring no debris falls into the engine.
Installing the ARMA Performance Turbocharger
With the stock turbocharger removed, you can now install the ARMA Performance Turbocharger. Follow these steps for a successful installation.
- Place the new turbocharger onto the manifold, aligning it with the bolt holes.
- Secure the turbocharger by tightening the bolts to the manufacturer’s specifications using a torque wrench.
- Reconnect the intake and exhaust pipes to the new turbocharger.
- Plug in all electrical connectors that were previously disconnected.
- Apply gasket sealant where necessary to ensure a proper seal.
Final Steps and Testing
After installing the turbocharger, it’s essential to perform final checks and testing to ensure everything is functioning correctly.
- Reconnect the battery and start the engine.
- Check for any leaks around the turbocharger and connections.
- Allow the engine to reach operating temperature while monitoring the oil pressure.
- Take the vehicle for a test drive to assess performance and listen for any unusual noises.
- After the test drive, recheck all connections and tighten any loose bolts.
Conclusion
Installing the ARMA Performance Turbocharger on the S63 can be a rewarding project that enhances your vehicle’s performance. By following these steps carefully, you can ensure a successful installation and enjoy the benefits of increased power and efficiency.