Table of Contents
The Armytrix GT-R Exhaust System is a popular choice for car enthusiasts looking to enhance performance and sound. This guide provides a detailed, step-by-step approach to installing the exhaust system, ensuring you have all the information needed for a successful installation.
Tools and Materials Required
- Socket set
- Wrench set
- Jack and jack stands
- Exhaust hanger removal tool
- Torque wrench
- Safety goggles
- Gloves
- Armytrix GT-R Exhaust System
Preparation
Before starting the installation, ensure that you have all the necessary tools and materials. It’s also important to work in a well-ventilated area and wear appropriate safety gear.
Step 1: Lift the Vehicle
Begin by lifting the vehicle using a jack. Secure the vehicle with jack stands to ensure safety while you work underneath.
Step 2: Remove the Stock Exhaust System
Locate the stock exhaust system and use your socket set to disconnect the exhaust pipes from the headers. Be sure to remove any clamps and hangers holding the exhaust in place.
Use the exhaust hanger removal tool to detach the hangers from the rubber mounts. Carefully lower the stock exhaust system and set it aside.
Step 3: Install the Armytrix GT-R Exhaust System
Take the Armytrix GT-R Exhaust System and position it under the vehicle. Start by connecting the exhaust pipes to the headers, ensuring a tight fit.
Next, attach the exhaust hangers to the rubber mounts. Make sure everything is aligned properly and securely in place.
Step 4: Tighten Connections
Using your torque wrench, tighten all connections to the manufacturer’s specifications. This step is crucial to prevent leaks and ensure optimal performance.
Step 5: Check for Leaks
Start the vehicle and let it run for a few minutes. Listen for any unusual sounds and check for exhaust leaks around the connections.
Step 6: Final Adjustments
If you notice any leaks or misalignments, turn off the engine and make the necessary adjustments. Ensure that the exhaust system is securely fastened and properly aligned.
Step 7: Lower the Vehicle
Once everything is secure, carefully lower the vehicle back to the ground using the jack. Remove the jack stands and ensure the area is clear.
Conclusion
Installing the Armytrix GT-R Exhaust System can greatly enhance your vehicle’s performance and sound. By following this step-by-step guide, you can successfully complete the installation and enjoy the benefits of your new exhaust system.