Table of Contents
Installing a turbo kit can significantly enhance the performance of your RSX. The Arospeed 50-60-70-80 Turbo Kit is designed for enthusiasts looking to boost their vehicle’s horsepower and torque. This guide will walk you through the installation process step-by-step.
What You Will Need
- Arospeed 50-60-70-80 Turbo Kit
- Basic hand tools (sockets, wrenches, screwdrivers)
- Torque wrench
- Oil filter wrench
- Coolant
- Engine oil
- Boost gauge
- Intercooler piping
- Vacuum lines
Preparation Steps
Before you begin the installation, it’s crucial to prepare your workspace and gather all necessary tools and components. Make sure your RSX is parked on a level surface and that the engine is cool.
1. Disconnect the Battery
Safety first! Start by disconnecting the negative terminal of the battery to prevent any electrical issues during the installation.
2. Remove the Engine Cover
Using a socket wrench, remove the bolts securing the engine cover. Carefully lift it off and set it aside.
Installing the Turbo Kit
3. Install the Turbo Manifold
Begin by removing the factory exhaust manifold. Ensure all bolts are removed, and carefully detach the manifold from the engine. Place the Arospeed turbo manifold in position and secure it with the provided bolts. Torque the bolts to the manufacturer’s specifications.
4. Attach the Turbocharger
Next, attach the turbocharger to the manifold. Ensure the gasket is in place to prevent leaks. Tighten the bolts securely, making sure not to overtighten.
5. Install the Oil Feed and Drain Lines
Connect the oil feed line from the engine to the turbocharger. Ensure the fittings are tight to avoid oil leaks. Next, install the oil drain line, ensuring it flows back to the oil pan without kinks.
6. Set Up the Intercooler
Mount the intercooler in a suitable location in front of the radiator. Use the provided brackets to secure it. Connect the intercooler piping from the turbocharger to the intercooler and then to the throttle body. Ensure all connections are tight and secure.
7. Install the Wastegate
Attach the wastegate to the turbocharger. Ensure that the wastegate is properly connected to the vacuum source and that all lines are securely fastened.
Final Steps
8. Connect the Vacuum Lines
Connect any necessary vacuum lines to the turbo and wastegate. Make sure there are no leaks and that all connections are secure.
9. Refill Fluids
Refill the engine oil and coolant as needed. Ensure that all fluids are at the appropriate levels before starting the engine.
10. Reconnect the Battery
Reconnect the negative terminal of the battery. Ensure that all tools and equipment are removed from the engine bay.
Testing Your Installation
Start the engine and listen for any unusual noises. Check for oil leaks and ensure that the turbo is functioning properly. Monitor the boost gauge to confirm that it is operating within the expected range.
Conclusion
Installing the Arospeed 50-60-70-80 Turbo Kit on your RSX can be a rewarding project that enhances your vehicle’s performance. By following this step-by-step guide, you can ensure a successful installation and enjoy the benefits of turbocharging your engine.