Table of Contents
Installing an AWE Tuning Exhaust System on your Audi RS5 can significantly enhance both the performance and sound of your vehicle. This comprehensive guide will walk you through the entire installation process, ensuring that you can achieve a professional finish.
Tools and Materials Needed
- Socket set
- Torque wrench
- Pliers
- Jack and jack stands
- Exhaust hangers
- AWE Tuning Exhaust System
- Safety goggles
- Gloves
Before you begin, ensure you have all the necessary tools and materials ready. This will help streamline the process and avoid interruptions.
Preparation Steps
Before starting the installation, it’s important to prepare your workspace and vehicle.
- Park your Audi RS5 on a flat, stable surface.
- Allow the exhaust system to cool completely.
- Disconnect the battery to prevent any electrical issues.
Removing the Stock Exhaust System
To install the AWE Tuning Exhaust System, you must first remove the stock exhaust. Follow these steps carefully:
- Use the jack to lift the rear of the vehicle and secure it with jack stands.
- Locate the exhaust hangers and remove them using pliers.
- Loosen the clamps securing the stock exhaust to the downpipes.
- Carefully slide the exhaust out from the hangers and remove it from the vehicle.
Installing the AWE Tuning Exhaust System
With the stock exhaust removed, you can now proceed to install the AWE Tuning Exhaust System.
- Begin by placing the new exhaust system under the vehicle.
- Align the exhaust tips with the rear cutouts of the bumper.
- Slide the new exhaust into the hangers, ensuring a snug fit.
- Secure the exhaust to the downpipes using the provided clamps.
- Double-check all connections and ensure everything is tight.
Finalizing the Installation
After ensuring the AWE Tuning Exhaust System is properly installed, it’s time to finalize the installation.
- Reconnect the battery.
- Start the engine and listen for any unusual sounds.
- Check for leaks around the connections.
- Lower the vehicle from the jack stands.
Post-Installation Tips
Once the installation is complete, consider the following tips to maintain your new exhaust system:
- Regularly inspect the exhaust for any signs of wear or damage.
- Keep the exhaust clean to prevent rust and corrosion.
- Consider scheduling a professional inspection after a few months of use.
Conclusion
Installing the AWE Tuning Exhaust System on your Audi RS5 can be a rewarding project that enhances your car’s performance and sound. By following this guide, you can ensure a successful installation and enjoy the benefits of your new exhaust system.