Installing the Bmw M4 G8x Turbo Upgrade: a Complete Step-by-step Guide

by

The BMW M4 G8X is a powerhouse of performance and engineering. Upgrading the turbo can significantly enhance its capabilities, providing a thrilling driving experience. In this guide, we will take you through the complete process of installing a turbo upgrade for the BMW M4 G8X.

Tools and Materials Needed

  • Socket set
  • Torque wrench
  • Screwdriver set
  • New turbocharger kit
  • Silicone hoses
  • Boost controller
  • Engine oil
  • Coolant
  • Shop towels
  • Safety goggles

Preparation Steps

Before you begin the installation, it is crucial to prepare your workspace and gather all necessary tools and materials. Ensure you have a clean, well-lit area to work in, and make sure your vehicle is parked on a flat surface.

Additionally, it’s important to disconnect the battery to avoid any electrical issues during the installation process.

Step 1: Remove the Front Bumper

To access the turbocharger, the front bumper must be removed. Follow these steps:

  • Open the hood and locate the screws securing the bumper.
  • Remove the screws using a screwdriver.
  • Disconnect any electrical connectors for fog lights or sensors.
  • Gently pull the bumper away from the vehicle.

Step 2: Drain Engine Coolant and Oil

Before removing the turbo, it’s essential to drain the engine coolant and oil to prevent spills. Here’s how:

  • Place a drain pan under the engine.
  • Remove the drain plug and allow the oil to completely drain.
  • Open the coolant reservoir cap and drain the coolant from the system.

Step 3: Remove the Turbocharger

Now that the fluids are drained, you can remove the existing turbocharger. Follow these steps:

  • Disconnect the intake and exhaust pipes from the turbo.
  • Remove the bolts securing the turbo to the manifold.
  • Carefully lift the turbo out of its housing.

Step 4: Install the New Turbocharger

With the old turbo removed, it’s time to install the new turbocharger. Make sure to follow these steps carefully:

  • Position the new turbo into the housing.
  • Secure it with the bolts, tightening them to the manufacturer’s specifications.
  • Reconnect the intake and exhaust pipes.

Step 5: Reconnect Fluids

After the new turbo is in place, it’s time to reconnect the fluids:

  • Replace the drain plug and refill the engine with fresh oil.
  • Refill the coolant reservoir with the appropriate coolant mixture.

Step 6: Reinstall the Front Bumper

Once everything is connected, you can reinstall the front bumper:

  • Align the bumper with the mounting points on the vehicle.
  • Reconnect any electrical connectors.
  • Secure the bumper with screws.

Step 7: Reconnect the Battery and Test the Vehicle

After the bumper is secured, reconnect the battery. Start the vehicle and check for any leaks or unusual noises. It’s essential to allow the engine to run for a few minutes to ensure everything is functioning correctly.

Conclusion

Upgrading the turbo on your BMW M4 G8X can significantly enhance its performance. By following this step-by-step guide, you can ensure a successful installation. Always remember to adhere to safety precautions and consult your vehicle’s manual for specific details related to your model.