Installing the Boost: Step-by-step Guide to the Edelbrock Supercharger Kit on Your Brz

by

Installing a supercharger can dramatically improve the performance of your Subaru BRZ. The Edelbrock Supercharger Kit is a popular choice among enthusiasts looking to enhance their vehicle’s power and responsiveness. This guide provides a step-by-step approach to installing the Edelbrock Supercharger Kit on your BRZ.

Preparation and Tools Needed

Before you begin the installation, gather the necessary tools and materials. This will ensure a smooth process and minimize downtime.

  • Socket set (metric)
  • Wrenches (metric)
  • Screwdrivers (flathead and Phillips)
  • Torque wrench
  • Ratchet and extensions
  • Engine oil
  • Coolant
  • New gaskets
  • Edelbrock Supercharger Kit

Step 1: Prepare the Vehicle

Start by ensuring your vehicle is parked on a level surface. Engage the parking brake and disconnect the negative battery terminal to prevent any electrical issues during installation.

Step 2: Remove the Stock Intake and Components

To install the supercharger, you will need to remove the stock intake system and other components that may obstruct access to the engine.

  • Remove the air intake duct.
  • Disconnect the mass airflow sensor.
  • Take off the throttle body.
  • Remove any hoses or wiring that may be in the way.

Step 3: Install the Edelbrock Supercharger Kit

With the stock components removed, you can now install the Edelbrock Supercharger. Follow the manufacturer’s instructions carefully for the best results.

  • Place the supercharger on the engine and align it with the mounting points.
  • Secure the supercharger using the provided bolts.
  • Reconnect the throttle body to the supercharger.
  • Attach the intake duct to the supercharger.

Step 4: Connect the Necessary Hoses and Wiring

Next, you will need to connect various hoses and electrical components to ensure the supercharger operates effectively.

  • Connect the coolant hoses to the supercharger.
  • Attach any vacuum lines as specified in the installation manual.
  • Reconnect the mass airflow sensor.
  • Ensure all wiring is secured and free from obstruction.

Step 5: Check and Refill Fluids

Before starting the engine, it’s crucial to check and refill fluids as needed to prevent any damage.

  • Check the engine oil level and add oil if necessary.
  • Ensure the coolant level is adequate.
  • Inspect all connections for leaks.

Step 6: Reconnect the Battery and Start the Engine

Once everything is connected and fluids are checked, reconnect the negative battery terminal. Start the engine and listen for any unusual noises.

Step 7: Test Drive and Tune

After starting the engine, take your BRZ for a test drive. Pay attention to how the vehicle responds and ensure everything is functioning properly. It may be necessary to tune the engine for optimal performance with the new supercharger.

Conclusion

Installing the Edelbrock Supercharger Kit on your Subaru BRZ can significantly enhance its performance. By following this step-by-step guide, you can ensure a successful installation. Always refer to the manufacturer’s instructions for specific details and safety precautions.