Table of Contents
Upgrading your Nissan GT-R with a BorgWarner EFR 7670 Turbo can significantly enhance performance and driving experience. This guide will walk you through the installation process step-by-step, ensuring that you can complete the upgrade with confidence.
Tools and Materials Needed
- BorgWarner EFR 7670 Turbo
- Turbocharger installation kit
- Socket set
- Wrenches
- Screwdrivers
- Torque wrench
- Oil and coolant lines
- Gaskets
- Heat-resistant gloves
- Safety glasses
Preparation
Before starting the installation, ensure that your workspace is clean and organized. Gather all necessary tools and materials to avoid interruptions during the process.
Make sure your GT-R is parked on a flat surface, and the engine is cool. Disconnect the battery to prevent any electrical issues during the installation.
Removing the Stock Turbocharger
Begin by removing the stock turbocharger. Follow these steps:
- Remove the engine cover to access the turbocharger.
- Disconnect the intake and exhaust pipes from the stock turbo.
- Unbolt the turbo from the manifold using the appropriate socket size.
- Carefully remove the turbocharger from its housing.
- Drain the oil and coolant lines connected to the stock turbo.
Installing the BorgWarner EFR 7670 Turbo
With the stock turbo removed, you can proceed to install the BorgWarner EFR 7670 Turbo. Follow these steps:
- Ensure that all surfaces are clean and free of debris.
- Install the new gaskets onto the manifold and turbocharger.
- Position the EFR 7670 Turbo onto the manifold and secure it with bolts.
- Reconnect the oil and coolant lines, ensuring they are tight and leak-free.
- Reconnect the intake and exhaust pipes to the new turbo.
Finalizing the Installation
After the turbo is securely installed, you need to finalize the installation:
- Reinstall the engine cover.
- Reconnect the battery.
- Check all connections for tightness and leaks.
- Start the engine and let it idle for a few minutes.
- Monitor oil and coolant levels, topping off as necessary.
Testing Your New Turbo Setup
Once the installation is complete, it’s crucial to test your new turbo setup:
- Take your GT-R for a short drive, gradually increasing speed.
- Listen for any unusual noises that may indicate an issue.
- Monitor boost levels and engine performance using a gauge.
- Check for any leaks during and after the test drive.
Conclusion
Installing the BorgWarner EFR 7670 Turbo on your Nissan GT-R can provide a significant performance boost. By following this comprehensive guide, you can ensure a successful installation and enjoy the enhanced capabilities of your vehicle.