Table of Contents
The BorgWarner EFR 8374 turbocharger is a popular upgrade for the Toyota GR Corolla, offering enhanced performance and responsiveness. In this guide, we will walk you through the complete step-by-step process of installing this turbocharger on your vehicle.
Tools and Materials Needed
- BorgWarner EFR 8374 Turbocharger
- Turbocharger installation kit
- Basic hand tools (wrenches, sockets, etc.)
- Torque wrench
- Oil and coolant
- Intercooler piping kit
- Boost controller (optional)
- Safety glasses and gloves
Preparation
Before starting the installation, ensure your vehicle is parked on a flat surface and the engine is cool. Gather all the necessary tools and materials listed above.
Step 1: Remove the Stock Turbocharger
Begin by disconnecting the battery to prevent any electrical issues. Next, remove the engine cover and any components obstructing access to the turbocharger.
Disconnecting the Exhaust and Intake
Carefully disconnect the exhaust downpipe from the stock turbocharger. Use a socket wrench to remove the bolts securing it in place. Then, detach the intake piping from the turbo.
Removing the Turbocharger
Remove the bolts securing the stock turbocharger to the manifold. You may need to use a breaker bar for stubborn bolts. Once all bolts are removed, carefully lift the turbocharger out of its position.
Step 2: Install the BorgWarner EFR 8374 Turbo
With the stock turbo removed, it’s time to install the BorgWarner EFR 8374 turbocharger. Begin by placing the new turbo in position on the manifold.
Securing the Turbocharger
Align the bolt holes and secure the turbocharger to the manifold using the provided bolts. Make sure to torque the bolts to the manufacturer’s specifications to ensure a proper seal.
Connecting the Exhaust and Intake
Reconnect the exhaust downpipe to the new turbocharger. Ensure all connections are tight and secure to prevent leaks. Then, attach the intake piping to the turbo and clamp it down.
Step 3: Install Additional Components
With the turbocharger in place, you will need to install any additional components, such as the intercooler piping and boost controller if applicable.
Intercooler Piping Installation
Follow the instructions provided with your intercooler piping kit to connect the piping from the turbocharger to the intercooler. Ensure all connections are secure and leak-free.
Boost Controller Setup
If you are installing a boost controller, refer to the manufacturer’s instructions for proper installation and wiring. Make sure to connect it to the appropriate vacuum source.
Step 4: Refill Fluids
After all components are installed, refill the engine oil and coolant. Check for any leaks before starting the engine.
Step 5: Reconnect the Battery and Start the Engine
Reconnect the battery and ensure everything is in place. Start the engine and let it idle for a few minutes. Check for any abnormal noises or leaks during this time.
Step 6: Test Drive
Once you are satisfied with the installation and there are no leaks, take your GR Corolla for a test drive. Monitor the boost levels and overall performance to ensure everything is functioning correctly.
Conclusion
Installing the BorgWarner EFR 8374 turbocharger on your GR Corolla can significantly enhance its performance. By following this step-by-step guide, you can ensure a successful installation and enjoy the benefits of increased power and efficiency.