Table of Contents
The Subaru WRX has long been a favorite among car enthusiasts, known for its impressive performance and rally heritage. One way to enhance the performance of your WRX is by installing the BWoody E85 Conversion Kit. This guide will take you through the steps necessary to successfully install this kit, ensuring that you can take full advantage of E85 fuel’s benefits.
What is the BWoody E85 Conversion Kit?
The BWoody E85 Conversion Kit is designed to allow Subaru WRX owners to run E85 fuel, which is a blend of 85% ethanol and 15% gasoline. This conversion can lead to improved horsepower and torque, as well as a cleaner burn compared to traditional gasoline.
Benefits of Using E85 Fuel
Switching to E85 fuel offers several advantages for your Subaru WRX:
- Increased Power: E85 has a higher octane rating, which allows for more aggressive tuning.
- Cleaner Combustion: Ethanol burns cleaner than gasoline, reducing carbon deposits.
- Cost Efficiency: E85 is often cheaper than premium gasoline, making it a cost-effective option.
- Environmental Impact: Ethanol is a renewable resource, which can lower your carbon footprint.
Tools and Materials Needed
Before starting the installation, gather the following tools and materials:
- Socket set
- Wrench set
- Screwdrivers (flathead and Phillips)
- Fuel line disconnect tool
- Safety glasses
- Gloves
- BWoody E85 Conversion Kit
Step-by-Step Installation Guide
Step 1: Prepare Your Vehicle
Before you begin the installation, ensure that your vehicle is parked on a flat surface and the engine is cool. Disconnect the negative battery terminal to prevent any electrical issues during the installation process.
Step 2: Remove the Engine Cover
Using your socket set, remove the bolts securing the engine cover. Carefully lift the cover off and set it aside to expose the fuel rail and injectors.
Step 3: Disconnect the Fuel Lines
Utilize the fuel line disconnect tool to carefully detach the fuel lines from the fuel rail. Be prepared for some fuel spillage, so have a rag or container ready to catch any excess fuel.
Step 4: Replace Fuel Injectors
Remove the old fuel injectors from the fuel rail and replace them with the new injectors provided in the BWoody E85 Conversion Kit. Ensure they are securely fitted to prevent any leaks.
Step 5: Install the New Fuel Lines
Attach the new fuel lines included in the conversion kit to the fuel rail and the fuel pump. Make sure all connections are tight and secure.
Step 6: Reconnect the Battery
Once all components are securely installed, reconnect the negative battery terminal. This will restore power to your vehicle.
Step 7: Test for Leaks
Turn the ignition to the “on” position without starting the engine. This will pressurize the fuel system. Check for any leaks around the fuel injectors and lines. If everything looks good, proceed to the next step.
Step 8: Start the Engine
Start your engine and let it idle for a few minutes. Monitor the engine’s performance and listen for any unusual noises. If everything is functioning correctly, you have successfully installed the BWoody E85 Conversion Kit!
Final Thoughts
Installing the BWoody E85 Conversion Kit can significantly enhance the performance of your Subaru WRX. By following this step-by-step guide, you can ensure a successful installation and enjoy the benefits of running E85 fuel. Always remember to consult your vehicle’s manual and consider professional assistance if needed.