Table of Contents
The Cobb Tuning Accessport is a powerful tool for enhancing the performance of your Scion FR-S. This guide will walk you through the installation process step-by-step, ensuring that you can take full advantage of this tuning device.
What You Will Need
- Cobb Tuning Accessport
- OBD-II Connector
- Computer with internet access
- USB cable
- Scion FR-S vehicle
Before you begin, make sure you have all the necessary tools and equipment to ensure a smooth installation process.
Step 1: Download the Accessport Manager
To get started, you will need to download the Cobb Accessport Manager software on your computer. This software is essential for updating your Accessport and managing your tunes.
Step 2: Connect the Accessport to Your Computer
Using the USB cable, connect the Accessport to your computer. Open the Accessport Manager and ensure that the software recognizes your device. If prompted, install any necessary drivers.
Step 3: Update Your Accessport
Once the Accessport is connected, check for any available firmware updates. It is crucial to have the latest version for optimal performance and compatibility.
Step 4: Prepare Your Vehicle
Ensure that your Scion FR-S is parked on a flat surface and that the engine is turned off. This will help prevent any issues during the installation process.
Step 5: Connect the Accessport to Your Vehicle
Locate the OBD-II port in your Scion FR-S, which is typically found under the dashboard near the driver’s seat. Plug the Accessport into this port securely.
Step 6: Turning on the Ignition
With the Accessport connected, turn the ignition key to the “On” position without starting the engine. This will power the Accessport and allow it to communicate with your vehicle’s ECU.
Step 7: Follow On-Screen Instructions
The Accessport will display a series of on-screen instructions. Follow these prompts carefully to complete the installation process. This may include selecting your vehicle model and the desired tune.
Step 8: Confirm the Tune Installation
After selecting your tune, the Accessport will begin to upload the new settings to your vehicle’s ECU. This process may take a few minutes. Once complete, confirm that the installation was successful.
Step 9: Disconnect the Accessport
Once the tuning process is finished, safely disconnect the Accessport from the OBD-II port. Make sure to store it in a safe place for future use.
Step 10: Test Drive Your Scion FR-S
Start your engine and take your Scion FR-S for a test drive. Pay attention to how the vehicle responds to acceleration and overall performance. This is your chance to experience the benefits of the Cobb Tuning Accessport.
Troubleshooting Tips
If you encounter any issues during the installation process, consider the following troubleshooting tips:
- Ensure that the Accessport is properly connected to the OBD-II port.
- Check that the vehicle’s battery is charged and functioning.
- Restart the Accessport and try the installation process again.
Conclusion
The installation of the Cobb Tuning Accessport on your Scion FR-S can significantly enhance your driving experience. By following this step-by-step guide, you can ensure a successful installation and enjoy improved performance on the road.