Installing the Edelbrock E-force S2000 Turbo Kit: a Complete Step-by-step Guide

by

Installing the Edelbrock E-Force S2000 Turbo Kit: A Complete Step-by-Step Guide

Installing the Edelbrock E-Force S2000 Turbo Kit can significantly enhance the performance of your vehicle. This guide will walk you through each step of the installation process, ensuring that you achieve optimal results.

What You Will Need

  • Edelbrock E-Force S2000 Turbo Kit
  • Basic hand tools (wrenches, sockets, screwdrivers)
  • Torque wrench
  • Engine oil
  • Coolant
  • Safety goggles and gloves
  • Shop manual for your vehicle

Preparation Steps

Before starting the installation, ensure that you have a clean workspace and all necessary tools and parts ready. Follow these preparation steps:

  • Disconnect the battery to prevent any electrical issues.
  • Drain the engine oil and coolant.
  • Remove any components that obstruct access to the engine.

Step-by-Step Installation Guide

Step 1: Install the Turbocharger

Begin by mounting the turbocharger to the exhaust manifold. Use the provided hardware to secure it in place:

  • Align the turbocharger with the exhaust manifold.
  • Tighten the bolts to the manufacturer’s specifications.

Step 2: Connect the Intercooler

Next, install the intercooler. This component is essential for cooling the air before it enters the engine:

  • Position the intercooler in front of the radiator.
  • Connect the piping from the turbocharger to the intercooler.
  • Secure all connections with clamps.

Step 3: Install the Intake Manifold

The Edelbrock intake manifold needs to be installed next:

  • Remove the stock intake manifold.
  • Place the new intake manifold onto the engine.
  • Secure it with the provided bolts.

Step 4: Connect the Fuel System

Upgrading the fuel system is crucial for supporting the increased power:

  • Install the upgraded fuel injectors.
  • Connect the fuel lines to the new injectors.
  • Ensure all connections are tight and leak-free.

Step 5: Install the Exhaust System

The exhaust system needs to be modified to accommodate the turbo:

  • Remove the stock exhaust system.
  • Install the new turbo-back exhaust system.
  • Secure all connections and check for leaks.

Step 6: Final Connections and Checks

After all major components are installed, perform these final checks:

  • Reconnect the battery.
  • Refill the engine oil and coolant.
  • Check all connections for tightness and leaks.

Testing Your Installation

Once everything is installed, it’s time to test your work:

  • Start the engine and allow it to idle.
  • Check for any unusual noises or leaks.
  • Take the vehicle for a test drive to ensure everything is functioning correctly.

Common Troubleshooting Tips

If you encounter issues during or after installation, consider these troubleshooting tips:

  • Check all electrical connections if the engine won’t start.
  • Inspect for any fuel leaks if you smell gasoline.
  • Ensure the turbocharger is properly mounted if you hear excessive noise.

Conclusion

Installing the Edelbrock E-Force S2000 Turbo Kit can transform your vehicle’s performance. By following this guide, you can ensure a successful installation and enjoy the benefits of increased power and efficiency.