Table of Contents
The Nissan 350Z is a beloved sports car known for its performance and handling. One way to enhance its power and performance is by installing the Edelbrock E-Force Supercharger. This guide will provide you with a comprehensive step-by-step process to install the supercharger on your 350Z.
What You Will Need
- Edelbrock E-Force Supercharger Kit
- Basic hand tools (wrenches, sockets, etc.)
- Torque wrench
- Engine oil
- Coolant
- Safety goggles and gloves
- Shop manual for 350Z
Preparation
Before starting the installation, ensure your 350Z is parked on a flat surface and the engine is cool. Gather all tools and components to streamline the process.
Step 1: Disconnect the Battery
Begin by disconnecting the negative terminal of the battery to prevent any electrical shorts during the installation.
Step 2: Remove the Engine Cover
Carefully remove the engine cover by unscrewing the bolts that hold it in place. Set it aside in a safe location.
Step 3: Remove the Intake System
Next, remove the intake system, including the air filter and intake pipes. This will provide access to the throttle body and engine components.
Installing the Edelbrock E-Force Supercharger
Step 4: Install the Supercharger Bracket
Begin by installing the supercharger bracket according to the instructions provided in the Edelbrock kit. Ensure all bolts are tightened to the manufacturer’s specifications.
Step 5: Mount the Supercharger
Carefully mount the supercharger onto the bracket. Make sure it is aligned properly and secure it with the supplied hardware.
Step 6: Connect the Intake Piping
Connect the intake piping to the supercharger. Ensure all clamps are tight and there are no leaks in the system.
Step 7: Install the Fuel System Components
Install the necessary fuel injectors and fuel rail as specified in the Edelbrock instructions. Ensure all connections are secure.
Step 8: Reconnect the Throttle Body
Reconnect the throttle body to the supercharger. Make sure to reattach any sensors and connectors that were removed during the intake disassembly.
Final Steps
Step 9: Refill Fluids
Refill the engine oil and coolant as necessary. Check for any leaks around the supercharger and fuel system.
Step 10: Reconnect the Battery
Reconnect the negative terminal of the battery. Ensure it is secured properly.
Step 11: Start the Engine
Start the engine and let it idle for a few minutes. Monitor for any unusual noises or leaks. If everything appears normal, proceed to take the car for a test drive.
Conclusion
Installing the Edelbrock E-Force Supercharger on your 350Z can significantly enhance its performance. By following this step-by-step guide, you can ensure a successful installation. Always consult the specific instructions provided with your supercharger kit for any model-specific details.