Table of Contents
The Edelbrock E85 Fuel Kit is a popular upgrade for car enthusiasts looking to boost their vehicle’s horsepower. This guide will walk you through the installation process step-by-step, ensuring you achieve those impressive 30 horsepower gains.
What You Will Need
- Edelbrock E85 Fuel Kit
- Basic hand tools (screwdrivers, wrenches, etc.)
- Fuel line disconnect tool
- Safety goggles
- Gloves
- Shop towels
Preparation Steps
Before you dive into the installation, it’s essential to prepare your workspace and gather all necessary tools and parts. Ensure your vehicle is parked on a flat surface and the engine is cool.
Safety First
Always wear safety goggles and gloves to protect yourself from fuel and debris. Make sure to work in a well-ventilated area to avoid inhaling harmful fumes.
Step-by-Step Installation Guide
Step 1: Disconnect the Battery
Begin by disconnecting the negative terminal of your vehicle’s battery. This will prevent any electrical shorts during the installation process.
Step 2: Relieve Fuel System Pressure
To safely relieve fuel system pressure, locate the fuel pump fuse and remove it. Start the engine and let it run until it stalls. This will clear any remaining pressure in the fuel lines.
Step 3: Remove the Fuel Lines
Using the fuel line disconnect tool, carefully disconnect the fuel lines from the fuel rail. Be prepared for some fuel spillage; have shop towels ready to catch any excess fuel.
Step 4: Install the E85 Fuel Kit
Follow the instructions provided with the Edelbrock E85 Fuel Kit. Typically, this involves installing larger fuel injectors and modifying the fuel lines to accommodate the E85 fuel type.
Step 5: Reconnect Fuel Lines
After installing the new components, reconnect the fuel lines securely. Ensure there are no leaks by inspecting the connections before proceeding.
Step 6: Reinstall the Fuel Pump Fuse
Once everything is connected, reinstall the fuel pump fuse. This will allow the fuel system to pressurize when you start the engine.
Step 7: Reconnect the Battery
Reconnect the negative terminal of the battery, ensuring a secure connection. This will restore power to your vehicle.
Step 8: Start the Engine
Start the engine and let it idle for a few minutes. Check for any leaks around the fuel lines and connections. If everything looks good, take your vehicle for a test drive.
Post-Installation Checks
After installation, it’s crucial to perform some checks to ensure everything is functioning correctly. Monitor the vehicle’s performance and make adjustments as necessary.
Check Performance
Pay attention to how your vehicle responds during acceleration. You should notice improved power and responsiveness with the E85 Fuel Kit installed.
Inspect for Leaks
Regularly inspect the fuel lines and connections for any signs of leaks. Address any issues immediately to prevent safety hazards.
Conclusion
Installing the Edelbrock E85 Fuel Kit can lead to significant horsepower gains, enhancing your driving experience. By following this step-by-step guide, you can ensure a successful installation and enjoy the benefits of your upgrade.