Table of Contents
Installing the ESS Tuning M3 Supercharger Kit can significantly enhance the performance of your BMW M3. This guide will walk you through the entire installation process, ensuring you have a clear understanding of each step.
What You Will Need
- ESS Tuning M3 Supercharger Kit
- Basic hand tools (wrenches, sockets, screwdrivers)
- Torque wrench
- Vacuum pump
- Oil catch can (optional)
- Safety goggles and gloves
Preparation Steps
Before starting the installation, ensure your workspace is clean and organized. Gather all necessary tools and parts to avoid interruptions during the process.
1. Disconnect the Battery
Begin by disconnecting the negative terminal of the battery to prevent any electrical issues during the installation.
2. Remove the Engine Cover
Remove the engine cover by unscrewing the bolts that hold it in place. Set it aside in a safe location.
3. Drain the Coolant
Drain the coolant from the radiator to prevent spills when removing the intake manifold. Make sure to collect the coolant in a proper container.
Removing the Stock Components
To install the supercharger, you will need to remove several stock components from the engine.
1. Remove the Intake Manifold
Carefully disconnect all hoses and electrical connections attached to the intake manifold. Remove the bolts securing it and lift it off the engine.
2. Remove the Throttle Body
Next, detach the throttle body from the intake manifold. This may involve removing additional bolts and electrical connectors.
3. Remove the Stock Supercharger Pulley (if applicable)
If your M3 is equipped with a stock supercharger, remove the pulley by following the manufacturer’s instructions. Ensure all bolts are removed, and the pulley is free from the assembly.
Installing the ESS Tuning M3 Supercharger Kit
Now that the stock components are removed, you can begin the installation of the ESS Tuning Supercharger Kit.
1. Install the Supercharger Bracket
Start by installing the supercharger bracket onto the engine. Use the provided bolts and ensure they are torqued to the specifications outlined in the installation manual.
2. Mount the Supercharger
Attach the supercharger to the bracket. Make sure it is securely fastened and aligned correctly. Double-check all connections before proceeding.
3. Install the New Throttle Body
Replace the stock throttle body with the new one provided in the ESS kit. Connect all necessary hoses and electrical connections.
4. Connect the Intake Piping
Attach the intake piping to the supercharger and ensure all clamps are tight. This will help maintain optimal airflow to the engine.
Final Steps
After installing the supercharger kit, there are a few final steps to complete the process.
1. Reinstall the Intake Manifold
Carefully place the intake manifold back onto the engine, ensuring all gaskets are in good condition. Secure it with the bolts you removed earlier.
2. Reconnect the Battery
Reconnect the negative terminal of the battery. Make sure it is tight and secure.
3. Fill the Cooling System
Refill the cooling system with the appropriate coolant mixture. Check for any leaks before starting the engine.
4. Start the Engine
Start the engine and let it idle for a few minutes. Listen for any unusual noises and monitor the gauges for proper readings.
Conclusion
Installing the ESS Tuning M3 Supercharger Kit can greatly improve your vehicle’s performance. By following this step-by-step guide, you can ensure a successful installation and enjoy the enhanced driving experience.