Table of Contents
Upgrading your vehicle’s exhaust system can significantly enhance its performance. In this guide, we will walk you through the installation of the FA24 Performance Exhaust, which can provide up to 15 horsepower gains. Follow these steps carefully to ensure a successful installation.
Tools and Materials Needed
- FA24 Performance Exhaust Kit
- Socket set
- Wrench set
- Torque wrench
- Jack and jack stands
- Safety glasses
- Gloves
- Lubricant spray
Preparation
Before starting the installation, ensure that your vehicle is parked on a flat surface and the engine is cool. Gather all tools and materials listed above. Wear safety glasses and gloves to protect yourself during the process.
Step 1: Lift the Vehicle
Using a jack, lift the rear of the vehicle and secure it with jack stands. Make sure the vehicle is stable before proceeding.
Step 2: Remove the Stock Exhaust
Locate the stock exhaust system. Use a socket or wrench to remove the bolts securing the exhaust to the exhaust manifold and the hangers. Carefully detach the exhaust system from the vehicle and set it aside.
Step 3: Prepare the New Exhaust
Unbox the FA24 Performance Exhaust and lay out all components. Inspect for any damages and ensure all parts are present. Apply lubricant spray to the hangers to make installation easier.
Step 4: Install the New Exhaust
Begin by attaching the new exhaust system to the exhaust manifold. Align the pipes and secure them with the provided bolts. Make sure to tighten them to the manufacturer’s specifications using a torque wrench.
Step 5: Secure the Exhaust Hangers
Once the exhaust is attached, secure the hangers in their respective locations. Ensure that the exhaust is properly positioned and does not touch any parts of the vehicle that could cause damage.
Step 6: Check for Leaks
Before lowering the vehicle, start the engine and let it idle. Listen for any unusual sounds that could indicate a leak. If you hear any, recheck the connections and tighten as necessary.
Step 7: Lower the Vehicle
Once you are satisfied that there are no leaks, turn off the engine and carefully lower the vehicle back to the ground. Remove the jack stands and ensure everything is secure.
Step 8: Test Drive
Take your vehicle for a test drive to experience the performance gains. Pay attention to the sound and responsiveness of the engine. You should notice an improvement in horsepower and overall performance.
Conclusion
Installing the FA24 Performance Exhaust is a straightforward process that can lead to significant horsepower gains. With the right tools and careful attention to detail, you can enhance your vehicle’s performance and enjoy the benefits of a quality exhaust system.