Table of Contents
The Subaru BRZ is a popular sports car known for its lightweight design and agile handling. With the introduction of the FA24 engine, enthusiasts have a new opportunity to enhance performance through turbo upgrades. This article will guide you through the costs, process, and expected results of installing the FA24 turbo upgrade in your Subaru BRZ.
Understanding the FA24 Turbo Upgrade
The FA24 turbo upgrade is designed to significantly increase the power output of the Subaru BRZ. By replacing the naturally aspirated engine with a turbocharged variant, drivers can experience enhanced acceleration and overall performance.
Benefits of the FA24 Turbo Upgrade
- Increased horsepower and torque
- Improved throttle response
- Enhanced driving experience
- Potential for better fuel efficiency
Cost Breakdown of the Upgrade
Before diving into the installation process, it’s important to understand the financial implications of the FA24 turbo upgrade. The costs can vary based on several factors including parts, labor, and any additional modifications.
Parts Costs
The primary components needed for the FA24 turbo upgrade include:
- Turbocharger kit: $3,000 – $5,000
- Intercooler: $500 – $1,000
- Exhaust system: $300 – $1,500
- Fuel injectors: $200 – $600
- Tuning software: $500 – $1,000
Labor Costs
Labor costs can vary depending on the shop’s hourly rate and the complexity of the installation. On average, expect to pay:
- Installation labor: $500 – $1,500
- Tuning labor: $200 – $500
Installation Process
Installing the FA24 turbo upgrade requires a systematic approach to ensure everything is done correctly. Below is a general overview of the installation process.
Preparation
Before starting the installation, gather all necessary tools and parts. It’s advisable to have a clean workspace and access to a lift or jack stands for easier access to the engine.
Removing the Stock Components
The first step in the installation process is to remove the stock components of the BRZ:
- Disconnect the battery.
- Remove the intake manifold.
- Take out the exhaust system.
- Disconnect the fuel lines and wiring harnesses.
Installing the Turbocharger
Once the stock components are removed, you can begin installing the turbocharger:
- Mount the turbocharger to the engine block.
- Connect the exhaust manifold.
- Install the intercooler and associated piping.
- Reconnect the fuel lines and wiring harnesses.
Finalizing the Installation
After the turbocharger is installed, you need to finalize the process:
- Install the new exhaust system.
- Reconnect the battery.
- Perform a thorough inspection of all connections.
- Start the engine and check for leaks.
Expected Results
After completing the FA24 turbo upgrade, drivers can expect to see significant improvements in performance. The following are typical results:
- Increase in horsepower: typically between 300-400 hp
- Torque gains: often exceeding 400 lb-ft
- Improved 0-60 mph times: reduced by 1-2 seconds
- Enhanced overall driving dynamics
Conclusion
The FA24 turbo upgrade offers Subaru BRZ owners a fantastic opportunity to enhance their vehicle’s performance. While the costs and installation process can be significant, the expected results make it a worthwhile investment for enthusiasts looking to maximize their driving experience.