Installing the Ford Performance Intake Manifold on a Ecoboost Mustang: Costs, Steps, and Real-world Power Gains

by

The Ford Performance Intake Manifold is a popular upgrade for EcoBoost Mustang enthusiasts looking to enhance their vehicle’s performance. This article outlines the costs, steps, and real-world power gains associated with installing this intake manifold.

Understanding the Ford Performance Intake Manifold

The Ford Performance Intake Manifold is designed to improve airflow to the engine, which can lead to increased horsepower and torque. This upgrade is particularly beneficial for those who frequently modify their vehicles or participate in motorsport activities.

Cost of the Upgrade

The total cost of installing the Ford Performance Intake Manifold can vary based on several factors including labor, additional parts, and location. Here’s a breakdown of the expected costs:

  • Ford Performance Intake Manifold: $600 – $800
  • Installation Labor (if applicable): $200 – $400
  • Additional Parts (gaskets, bolts, etc.): $50 – $100

In total, you can expect to spend approximately $850 to $1300 for the complete installation, depending on your specific situation.

Steps to Install the Ford Performance Intake Manifold

Installing the Ford Performance Intake Manifold is a task that can be completed by those with moderate mechanical skills. Below are the steps to guide you through the installation process:

  • Gather Tools and Materials: Ensure you have all necessary tools, including sockets, wrenches, and screwdrivers, as well as the intake manifold and any additional parts.
  • Disconnect the Battery: Safety first! Disconnect the negative terminal of the battery to prevent any electrical issues.
  • Remove the Engine Cover: If applicable, take off the engine cover to access the intake manifold.
  • Remove the Existing Intake Manifold: Carefully disconnect any hoses, sensors, and electrical connectors before unbolting the old manifold.
  • Clean the Surface: Ensure the engine surface is clean and free of debris to ensure a proper seal with the new manifold.
  • Install the New Intake Manifold: Place the new manifold onto the engine, ensuring it aligns correctly. Secure it with the appropriate bolts.
  • Reconnect Hoses and Sensors: Reattach all hoses, sensors, and electrical connectors that were removed.
  • Reinstall the Engine Cover: If applicable, put the engine cover back on.
  • Reconnect the Battery: Finally, reconnect the negative terminal of the battery.
  • Test the Installation: Start the engine and check for any leaks or issues.

Real-World Power Gains

One of the most significant reasons for upgrading to the Ford Performance Intake Manifold is the potential for increased power. Many users report substantial gains in horsepower and torque after installation. Here’s what you can typically expect:

  • Horsepower Gain: 30 – 50 HP depending on other modifications.
  • Torque Gain: 25 – 40 lb-ft.
  • Improved Throttle Response: Enhanced engine responsiveness, especially at higher RPMs.

These gains can vary based on other modifications and tuning, but many EcoBoost Mustang owners find the upgrade to be well worth the investment.

Conclusion

The Ford Performance Intake Manifold is a valuable upgrade for EcoBoost Mustang owners seeking improved performance. With a reasonable cost and clear steps for installation, this modification can lead to significant power gains and an enhanced driving experience.