Table of Contents
Installing a turbocharger can significantly enhance the performance of your R35 GT-R. The Garrett GTX3076R turbo is a popular choice among enthusiasts for its balance of power and reliability. This guide will walk you through the comprehensive steps needed to install this turbo on your GT-R.
Tools and Materials Needed
- Garrett GTX3076R Turbo
- Turbocharger installation kit
- Socket set (metric)
- Torque wrench
- Flathead and Phillips screwdrivers
- Wrenches (metric)
- Oil and coolant lines
- Gasket set
- Heat-resistant gloves
- Safety glasses
Preparation
Before starting the installation, ensure that your car is parked on a flat surface and the engine is cool. Gather all your tools and materials to avoid interruptions during the process.
Disconnecting the Battery
Start by disconnecting the negative terminal of the battery. This step is crucial to prevent any electrical shorts while working on the vehicle.
Removing the Engine Cover
Next, remove the engine cover by unscrewing the bolts that secure it in place. Carefully lift it off and set it aside.
Removing the Stock Turbo
With the engine cover removed, you can now access the stock turbocharger. Follow these steps to remove it:
Disconnecting the Exhaust and Intake
Start by disconnecting the exhaust and intake pipes from the stock turbo. Use the appropriate socket and wrench to loosen the clamps and bolts.
Removing the Oil and Coolant Lines
Next, carefully detach the oil and coolant lines connected to the stock turbo. Be prepared for some fluid spillage, so have rags handy to clean up.
Unbolting the Turbo
Finally, unbolt the stock turbo from the manifold. Ensure that you keep track of all the bolts for reinstallation later.
Installing the Garrett GTX3076R Turbo
Now that the stock turbo is removed, it’s time to install the Garrett GTX3076R turbo. Follow these steps:
Preparing the New Turbo
Before installation, ensure that the Garrett GTX3076R turbo is clean and free of debris. Check the gasket and oil lines to make sure they are ready for installation.
Mounting the Turbo
Align the new turbo with the manifold and secure it using the original bolts. Make sure to torque them to the manufacturer’s specifications to avoid any leaks or failures.
Reconnecting Oil and Coolant Lines
Reconnect the oil and coolant lines to the new turbo. Ensure that all connections are tight and secure to prevent any leaks.
Connecting Exhaust and Intake
Attach the exhaust and intake pipes to the new turbo. Again, ensure all clamps and bolts are tightened properly.
Final Steps
With the new turbo installed, there are a few final steps to complete the installation:
Reinstalling the Engine Cover
Carefully place the engine cover back onto the engine and secure it with the bolts you previously removed.
Reconnecting the Battery
Reconnect the negative terminal of the battery. Ensure that the connection is secure.
Checking for Leaks
Start the engine and let it idle for a few minutes. Check for any oil or coolant leaks around the turbo and lines.
Test Drive
Once you are satisfied that there are no leaks, take your GT-R for a test drive. Monitor the performance and ensure everything is functioning as expected.
Conclusion
Installing the Garrett GTX3076R turbo on your R35 GT-R can significantly enhance its performance. By following this step-by-step guide, you can ensure a successful installation and enjoy the benefits of increased power and efficiency.