Installing the Genuine Mitsubishi Evo Viii Turbo: a Comprehensive Step-by-step Guide

by

Installing a genuine Mitsubishi Evo VIII turbo can significantly enhance your vehicle’s performance. This comprehensive step-by-step guide will walk you through the installation process, ensuring you have all the necessary tools and information to complete the task efficiently.

Preparation Before Installation

Before diving into the installation, it’s crucial to prepare adequately. Gather all the necessary tools and parts to ensure a smooth process.

  • Genuine Mitsubishi Evo VIII turbo
  • Socket set
  • Torque wrench
  • Gasket sealant
  • Oil and coolant
  • Safety gloves and glasses

Step 1: Safety First

Always prioritize safety when working on your vehicle. Make sure to wear safety gloves and glasses, and ensure the car is parked on a flat surface with the engine cooled down.

Step 2: Remove the Existing Turbo

To install the new turbo, you must first remove the existing one. Follow these steps:

  • Disconnect the battery to prevent any electrical issues.
  • Remove the intake pipes connected to the existing turbo.
  • Unbolt the exhaust manifold from the turbo.
  • Disconnect the oil and coolant lines carefully.
  • Remove the existing turbo from the mounting bracket.

Step 3: Preparing the New Turbo

Once the old turbo is removed, it’s time to prepare the new Mitsubishi Evo VIII turbo for installation. Ensure the following:

  • Inspect the new turbo for any manufacturing defects.
  • Apply gasket sealant to the mounting surfaces.
  • Check all oil and coolant lines for proper fit.

Step 4: Installing the New Turbo

Now that the new turbo is prepared, follow these steps for installation:

  • Position the new turbo onto the mounting bracket.
  • Secure the turbo using the bolts, tightening them to the manufacturer’s specifications.
  • Reconnect the oil and coolant lines, ensuring there are no leaks.
  • Reattach the exhaust manifold to the turbo.
  • Reconnect the intake pipes to the new turbo.

Step 5: Final Checks

Before starting the engine, it’s essential to perform some final checks:

  • Double-check all connections and bolts for tightness.
  • Ensure there are no oil or coolant leaks.
  • Reconnect the battery.

Step 6: Testing the Installation

With everything in place, it’s time to test the installation. Start the engine and let it idle for a few minutes. Pay attention to:

  • Listen for any unusual sounds from the turbo.
  • Check for leaks around the oil and coolant lines.
  • Monitor the engine temperature to ensure it remains stable.

Step 7: Final Thoughts

Installing a genuine Mitsubishi Evo VIII turbo can greatly improve your vehicle’s performance. By following this comprehensive step-by-step guide, you can ensure a successful installation. Always remember to consult your vehicle’s manual for specific torque settings and safety precautions. Happy driving!