Installing the Greddy Rsx Turbo Kit: a Complete Step-by-step Guide

by

Installing a turbo kit can significantly enhance your vehicle’s performance. The Greddy RSX Turbo Kit is a popular choice among car enthusiasts looking to boost their Honda RSX’s horsepower and torque. In this guide, we will walk you through the complete installation process step-by-step, ensuring you have all the information you need to successfully install the kit.

Tools and Materials Needed

  • Greddy RSX Turbo Kit
  • Socket set
  • Wrenches
  • Screwdrivers
  • Torque wrench
  • Oil catch can
  • Vacuum lines
  • Coolant
  • Engine oil
  • Safety goggles
  • Gloves
  • Shop towels

Preparation Steps

Before starting the installation, it’s crucial to prepare your workspace and vehicle. Follow these steps to ensure a smooth installation process:

  • Park the vehicle on a flat, stable surface.
  • Disconnect the negative battery terminal to prevent electrical issues.
  • Gather all necessary tools and materials.
  • Read through the Greddy RSX Turbo Kit manual for specific instructions.

Removing the Stock Components

The first major step in the installation process is removing the stock components that will be replaced by the turbo kit. This includes the intake manifold, exhaust manifold, and other related parts. Follow these steps:

  • Remove the engine cover by unscrewing the bolts.
  • Disconnect and remove the air intake system.
  • Drain the coolant from the radiator.
  • Disconnect the exhaust manifold from the engine.
  • Remove the stock fuel injectors and fuel rail.

Installing the Turbo Kit Components

With the stock components removed, you can now begin installing the Greddy RSX Turbo Kit. Follow these steps carefully:

  • Install the turbocharger onto the new exhaust manifold.
  • Secure the manifold with the provided bolts and torque them according to the specifications.
  • Connect the oil feed and return lines to the turbo.
  • Install the new fuel injectors and fuel rail.
  • Connect the intake piping from the turbo to the throttle body.
  • Install the intercooler and connect the necessary piping.
  • Reconnect the vacuum lines and ensure all connections are secure.

Reconnecting and Finalizing Installation

After installing all the turbo components, it’s time to reconnect everything and finalize the installation:

  • Reconnect the air intake system and engine cover.
  • Refill the coolant in the radiator.
  • Reconnect the negative battery terminal.
  • Check all connections for tightness and leaks.
  • Ensure that the oil levels are adequate before starting the engine.

Testing the Installation

Before taking your vehicle for a drive, it’s essential to test the installation:

  • Start the engine and let it idle for a few minutes.
  • Check for any unusual sounds or leaks.
  • Monitor the oil pressure and coolant temperature.
  • Take the vehicle for a short test drive, gradually increasing speed.
  • Check for any performance issues or warning lights on the dashboard.

Maintenance Tips for Your Turbocharged RSX

To ensure the longevity and performance of your turbocharged Honda RSX, follow these maintenance tips:

  • Regularly check and change the engine oil.
  • Inspect the turbocharger for any signs of wear or damage.
  • Keep an eye on the coolant levels and temperature.
  • Monitor boost levels and engine performance.
  • Clean or replace the air filter as needed.

Conclusion

Installing the Greddy RSX Turbo Kit can be a rewarding project that enhances your vehicle’s performance. By following this step-by-step guide, you should be able to complete the installation successfully. Always remember to prioritize safety and consult a professional if you encounter any issues during the process.