Table of Contents
Installing a new exhaust system can significantly enhance the performance and sound of your Subaru WRX. The GReddy Titanium Turbo Back Exhaust is a popular choice among enthusiasts for its lightweight construction and exceptional quality. In this guide, we will walk you through the entire installation process step-by-step.
Tools and Materials Needed
- GReddy Titanium Turbo Back Exhaust kit
- Socket set
- Wrench set
- Torque wrench
- Jack and jack stands
- Safety goggles
- Gloves
- Exhaust hanger removal tool
Before starting the installation, ensure you have all the necessary tools and materials at hand. This will make the process smoother and more efficient.
Preparing Your Vehicle
To begin, you need to prepare your WRX for the installation. Follow these steps:
- Park your vehicle on a level surface.
- Engage the parking brake to prevent any movement.
- Use a jack to lift the rear of the car and secure it with jack stands.
Once your vehicle is secure, you can proceed to remove the stock exhaust system.
Removing the Stock Exhaust
Follow these steps to remove the stock exhaust system:
- Locate the bolts connecting the exhaust to the turbo and the mid-pipe.
- Using the socket set, remove the bolts carefully.
- Disconnect the exhaust hangers using the exhaust hanger removal tool.
- Remove the stock exhaust system from the vehicle.
Be cautious while removing the exhaust, as it can be heavy and cumbersome.
Installing the GReddy Titanium Turbo Back Exhaust
Now that the stock exhaust is removed, it’s time to install the GReddy Titanium Turbo Back Exhaust. Follow these steps:
- Begin with the downpipe. Align it with the turbo and secure it with the provided bolts.
- Attach the mid-pipe to the downpipe, ensuring a snug fit.
- Install the rear section of the exhaust, connecting it to the mid-pipe.
- Use the exhaust hangers to secure the exhaust system in place.
Make sure all connections are tight but be careful not to overtighten, as this can damage the components.
Final Checks and Torque Specifications
After installing the exhaust, it’s essential to perform a few final checks:
- Double-check all bolts and connections to ensure they are secure.
- Refer to the GReddy manual for specific torque specifications for each bolt.
- Inspect the exhaust hangers to ensure they are properly positioned.
These steps will help prevent any leaks or issues once the installation is complete.
Testing the Installation
Once everything is secured, it’s time to test your new exhaust system:
- Start your vehicle and let it idle for a few minutes.
- Listen for any unusual sounds that may indicate a leak.
- Take your WRX for a short drive to ensure everything is functioning correctly.
Pay attention to the sound and performance. You should notice an improvement in both.
Conclusion
Installing the GReddy Titanium Turbo Back Exhaust on your WRX can be a rewarding project that enhances your vehicle’s performance and sound. By following this step-by-step guide, you can ensure a successful installation and enjoy the benefits of your new exhaust system.
Always remember to adhere to safety protocols and consult a professional if you feel uncertain about any step in the process.