Table of Contents
The HKS Hyper Max Exhaust system is a popular upgrade for the Mitsubishi Eclipse GST, known for its ability to enhance both sound and performance. In this article, we will guide you through the installation process of the HKS Hyper Max Exhaust, which can be completed for around $1,200.
Benefits of Upgrading to HKS Hyper Max Exhaust
Upgrading to the HKS Hyper Max Exhaust offers several key benefits:
- Improved Sound: The exhaust system provides a deeper, more aggressive sound that enhances the driving experience.
- Increased Performance: The design allows for better exhaust flow, which can lead to improved horsepower and torque.
- Weight Reduction: The HKS exhaust is often lighter than the stock system, contributing to better overall vehicle dynamics.
- Durability: Made from high-quality materials, the HKS exhaust is designed to withstand harsh conditions.
Tools Required for Installation
Before you begin the installation, gather the following tools:
- Socket set
- Wrench set
- Jack and jack stands
- Torque wrench
- Cutting tool (if necessary)
- Safety glasses
- Gloves
Step-by-Step Installation Guide
Step 1: Prepare Your Vehicle
Start by parking your Eclipse GST on a flat surface and engaging the parking brake. Use a jack to lift the rear of the vehicle and secure it with jack stands. Make sure you have enough space to work comfortably.
Step 2: Remove the Stock Exhaust System
Locate the stock exhaust system. Use your socket and wrench set to remove the bolts connecting the exhaust to the catalytic converter and the hangers holding it in place. If necessary, use a cutting tool to remove any rusted or difficult sections.
Step 3: Install the HKS Hyper Max Exhaust
Begin by positioning the HKS Hyper Max Exhaust system where the stock exhaust was located. Align the exhaust with the hangers and the catalytic converter. Secure it in place using the provided bolts and hangers, making sure everything is tightened to the manufacturer’s specifications.
Step 4: Check for Leaks
Once the exhaust is installed, start the engine and let it idle. Listen for any unusual noises and check for exhaust leaks. If you notice any, make the necessary adjustments to ensure a proper seal.
Step 5: Lower the Vehicle
After confirming that the installation is secure and leak-free, carefully lower the vehicle back to the ground. Remove the jack stands and jack, and perform a final check of the exhaust system.
Post-Installation Tips
After installing the HKS Hyper Max Exhaust, consider the following tips:
- Take your vehicle for a test drive to experience the improved sound and performance.
- Monitor your exhaust system for any signs of wear or leaks in the following weeks.
- Consider pairing the exhaust with other performance upgrades for even greater gains.
Conclusion
The installation of the HKS Hyper Max Exhaust on your Mitsubishi Eclipse GST can significantly enhance both sound and performance. With the right tools and a bit of patience, you can complete this upgrade for around $1,200, transforming your driving experience.