Installing the Lund Racing Flexfuel Kit on a 2019 Mustang Gt: a Complete Walkthrough

by

Installing the Lund Racing FlexFuel Kit on a 2019 Mustang GT can enhance performance and flexibility in fuel choices. This guide provides a step-by-step walkthrough for a successful installation.

What You Will Need

  • Lund Racing FlexFuel Kit
  • Socket set
  • Wrenches
  • Wire strippers
  • Electrical tape
  • Safety goggles
  • Gloves

Before starting the installation, ensure you have all the necessary tools and components ready. Safety should be your priority, so wear gloves and goggles throughout the process.

Preparation Steps

Begin by preparing your workspace and the vehicle. Follow these steps:

  • Park the Mustang GT on a flat surface.
  • Disconnect the battery to avoid any electrical issues.
  • Gather all tools and the FlexFuel kit components.

Removing the Stock Components

Next, you will need to remove the stock components that will be replaced by the FlexFuel kit. Follow these instructions:

  • Locate the stock fuel line and disconnect it carefully.
  • Remove any electrical connectors attached to the fuel system.
  • Take out the stock flex fuel sensor if applicable.

Installing the Lund Racing FlexFuel Kit

With the stock components removed, it’s time to install the Lund Racing FlexFuel Kit. Follow these steps:

  • Install the new flex fuel sensor in the designated location.
  • Connect the new fuel lines from the sensor to the fuel injectors.
  • Secure all connections and ensure they are tight.

Wiring the FlexFuel Kit

Wiring is a crucial part of the installation. Follow these wiring instructions carefully:

  • Use wire strippers to prepare the wires for connection.
  • Connect the wires from the flex fuel sensor to the vehicle’s wiring harness.
  • Secure all connections with electrical tape to prevent short circuits.

Reconnecting the Battery

Once the installation is complete, reconnect the battery. This step is essential to test the new system.

Testing the Installation

After reconnecting the battery, it’s time to test the installation. Follow these steps:

  • Start the engine and listen for any unusual sounds.
  • Check for leaks around the fuel lines and connections.
  • Monitor the performance of the vehicle to ensure everything is functioning correctly.

Troubleshooting Common Issues

If you encounter any issues after installation, consider the following troubleshooting tips:

  • Ensure all connections are secure and tight.
  • Check for any error codes using an OBD-II scanner.
  • Consult the Lund Racing manual for specific troubleshooting advice.

Conclusion

Installing the Lund Racing FlexFuel Kit on a 2019 Mustang GT can significantly enhance your vehicle’s performance. By following this complete walkthrough, you can ensure a successful installation and enjoy the benefits of flex fuel capability.