Table of Contents
The Mazdaspeed rear spoiler is a popular modification among Mazda enthusiasts looking to enhance their vehicle’s aerodynamics and potentially gain slight power improvements. This article will guide you through the process of installing the Mazdaspeed rear spoiler, detailing the benefits and providing step-by-step instructions.
Benefits of the Mazdaspeed Rear Spoiler
Before diving into the installation process, it’s important to understand the advantages of adding a rear spoiler to your Mazda. Here are some key benefits:
- Improved Aerodynamics: The rear spoiler helps to reduce drag and improve airflow over the vehicle, enhancing stability at higher speeds.
- Enhanced Aesthetic Appeal: The Mazdaspeed spoiler adds a sporty look to your Mazda, making it stand out on the road.
- Potential Power Gains: While the gains may be slight, the improved aerodynamics can contribute to better overall performance.
- Increased Downforce: The spoiler creates downforce, which can improve handling and traction during high-speed driving.
Tools and Materials Needed
To successfully install the Mazdaspeed rear spoiler, you will need the following tools and materials:
- Mazdaspeed Rear Spoiler Kit
- Socket Set
- Drill with Drill Bits
- Measuring Tape
- Level
- Masking Tape
- Clean Cloth
- Automotive Adhesive (if not included)
Installation Steps
Follow these steps to install your Mazdaspeed rear spoiler:
Step 1: Prepare the Vehicle
Start by cleaning the area where the spoiler will be mounted. Use a clean cloth to remove any dirt or debris from the trunk lid.
Step 2: Position the Spoiler
Using the measuring tape, find the center of the trunk lid. Mark this spot with masking tape. Position the spoiler on the trunk lid, ensuring it is centered and level. Use the level to double-check alignment.
Step 3: Mark Drill Holes
Once the spoiler is correctly positioned, mark the drill holes through the mounting holes of the spoiler onto the trunk lid using a marker. Double-check the alignment before proceeding.
Step 4: Drill Holes
Using the drill and appropriate drill bit, carefully drill holes at the marked locations on the trunk lid. Ensure you do not drill too deep to avoid damaging the trunk.
Step 5: Attach the Spoiler
Align the spoiler with the drilled holes and secure it using the provided bolts. If your kit includes adhesive, apply it to the mounting surface before securing the bolts for added stability.
Step 6: Final Adjustments
Once the spoiler is attached, step back and visually inspect the alignment. Make any necessary adjustments to ensure it is straight and secure. Tighten all bolts as needed.
Post-Installation Tips
After installation, consider the following tips to maintain your new spoiler:
- Regularly check the bolts to ensure they remain tight.
- Clean the spoiler with a gentle automotive cleaner to avoid scratches.
- Avoid using a car wash with brushes that may damage the spoiler.
Conclusion
Installing the Mazdaspeed rear spoiler is a straightforward process that can enhance both the aesthetics and performance of your Mazda. By following the steps outlined above, you can achieve a professional-looking installation that contributes to better aerodynamics and slight power gains. Enjoy your new look and the improved driving experience!