Table of Contents
The Mishimoto BRZ Turbo Kit is an excellent way to enhance the performance of your Subaru BRZ. This guide provides a comprehensive step-by-step approach to installing the turbo kit, ensuring that you can achieve optimal results.
What You Will Need
- Mishimoto BRZ Turbo Kit
- Basic hand tools (wrenches, sockets, screwdrivers)
- Torque wrench
- Oil and coolant
- Safety glasses and gloves
- Service manual for your BRZ
Preparation Steps
Before starting the installation, ensure that your vehicle is parked on a flat surface and the engine is cool. Gather all necessary tools and components to streamline the process.
1. Disconnect the Battery
Begin by disconnecting the negative terminal of the battery to prevent any electrical issues during installation. This is a crucial safety step.
2. Remove the Stock Components
Carefully remove the stock intake system and exhaust components. This may include:
- Air intake duct
- Throttle body
- Exhaust manifold
Installing the Turbo Kit
3. Install the Turbo Manifold
Begin by installing the turbo manifold onto the engine block. Ensure that all gaskets are properly placed and that the manifold is securely bolted down according to the torque specifications outlined in your service manual.
4. Mount the Turbocharger
Next, mount the turbocharger onto the manifold. Make sure to align the turbocharger correctly and tighten all bolts to the specified torque settings.
5. Install the Oil and Coolant Lines
Connect the oil and coolant lines to the turbocharger. Be sure to check for any leaks and ensure that all connections are secure.
6. Install the Intercooler
Install the intercooler in front of the radiator. Use the included mounting hardware to secure it in place. Connect the piping from the turbocharger to the intercooler.
7. Reconnect the Intake System
Reconnect the intake system to the turbocharger. Ensure that all clamps and connections are tight to prevent any air leaks.
8. Reinstall the Exhaust Components
Reinstall the exhaust components that were removed earlier. Make sure to use new gaskets where necessary to ensure a proper seal.
Final Steps
9. Reconnect the Battery
Once everything is installed, reconnect the negative terminal of the battery. This will restore power to the vehicle.
10. Check for Leaks
Start the engine and let it idle. Check for any signs of oil or coolant leaks around the turbocharger and associated lines.
11. Test Drive
After confirming that there are no leaks, take your BRZ for a test drive. Monitor the boost levels and listen for any unusual sounds.
Conclusion
Installing the Mishimoto BRZ Turbo Kit can significantly enhance your vehicle’s performance. By following this step-by-step guide, you can ensure a successful installation and enjoy the benefits of turbocharging your Subaru BRZ.