Table of Contents
The Mishimoto Evo Intercooler Kit is a popular upgrade for those looking to enhance their vehicle’s performance. This step-by-step guide will help you install the intercooler kit effectively, allowing you to achieve 3-4 PSI gains in boost pressure.
What You’ll Need
- Mishimoto Evo Intercooler Kit
- Socket set
- Wrenches
- Screwdrivers
- Torque wrench
- Heat-resistant gloves
- Safety glasses
- Coolant
Preparation Steps
Before starting the installation, ensure that your vehicle is parked on a level surface and the engine is cool. Gather all necessary tools and read through the instructions provided with the Mishimoto kit.
Step 1: Disconnect the Battery
Begin by disconnecting the negative terminal of the battery to prevent any electrical issues during the installation.
Step 2: Remove the Front Bumper
Remove the screws and clips securing the front bumper. Carefully pull the bumper away from the vehicle, taking care not to damage any wiring or connectors.
Step 3: Remove the Stock Intercooler
Locate the stock intercooler and disconnect all associated piping and hoses. Unbolt the intercooler from its mounting points and remove it from the vehicle.
Installing the Mishimoto Intercooler
Step 4: Position the New Intercooler
Carefully position the Mishimoto intercooler in place, ensuring it aligns with the mounting points. Check for any obstructions before proceeding.
Step 5: Secure the Intercooler
Using the provided bolts, secure the intercooler to the mounting points. Ensure that all bolts are tightened to the manufacturer’s specifications using a torque wrench.
Step 6: Reconnect Piping and Hoses
Reconnect all piping and hoses to the intercooler. Make sure that each connection is secure and that there are no leaks.
Finishing Touches
Step 7: Reinstall the Front Bumper
Once the intercooler is securely installed, carefully reinstall the front bumper. Ensure that all screws and clips are replaced and secured properly.
Step 8: Reconnect the Battery
Reconnect the negative terminal of the battery. Make sure it is tight and secure.
Testing Your Installation
After completing the installation, start your vehicle and let it idle for a few minutes. Check for any leaks or abnormalities in the system. Take your vehicle for a test drive to ensure the intercooler is functioning properly.
Conclusion
Installing the Mishimoto Evo Intercooler Kit is a straightforward process that can lead to significant gains in performance. By following this guide, you can enhance your vehicle’s efficiency and enjoy the benefits of increased boost pressure.