Installing the Mishimoto Fmic Kit: Step-by-step Intercooler Guide for Beginners

by

The Mishimoto FMIC (Front Mount Intercooler) Kit is an excellent upgrade for those looking to improve their vehicle’s performance. This guide will take you through the step-by-step process of installing the FMIC kit, ensuring that even beginners can follow along with ease.

What You Will Need

Before starting the installation, it’s essential to gather all the necessary tools and components. Here’s a list of what you’ll need:

  • Mishimoto FMIC Kit
  • Socket set
  • Wrench set
  • Flathead screwdriver
  • Phillips screwdriver
  • Torque wrench
  • Cutting tool (if required)
  • Zip ties
  • Safety glasses
  • Gloves

Preparation

Before you begin the installation, it’s crucial to prepare your vehicle. Follow these steps to ensure a smooth process:

  • Park your vehicle on a flat surface.
  • Disconnect the battery to prevent any electrical issues.
  • Remove the front bumper to access the intercooler area.

Removing the Stock Intercooler

With the front bumper off, you can now remove the stock intercooler. Follow these steps:

  • Locate the stock intercooler and the associated piping.
  • Loosen the clamps on the piping using a flathead screwdriver.
  • Carefully remove the piping from the stock intercooler.
  • Unbolt the stock intercooler from its mounting points.
  • Take out the stock intercooler from the engine bay.

Installing the Mishimoto FMIC

Now that the stock intercooler is removed, it’s time to install the Mishimoto FMIC. Follow these steps:

  • Position the Mishimoto FMIC in the same location as the stock intercooler.
  • Secure the FMIC using the provided mounting brackets and bolts.
  • Attach the piping to the FMIC, ensuring a snug fit.
  • Use the provided clamps to secure the piping in place.

Connecting the Piping

After securing the FMIC, you will need to connect the piping. Here’s how:

  • Locate the inlet and outlet pipes for the FMIC.
  • Connect the inlet pipe to the throttle body.
  • Connect the outlet pipe to the intake manifold.
  • Ensure all connections are tight and secure with clamps.

Reinstalling the Front Bumper

With the FMIC and piping in place, it’s time to reinstall the front bumper. Follow these steps:

  • Align the front bumper with the mounting points on the vehicle.
  • Secure the bumper using the original bolts.
  • Check that all clips and fasteners are properly engaged.

Final Checks

Before starting your vehicle, perform these final checks:

  • Ensure all clamps and bolts are tightened.
  • Reconnect the battery.
  • Check for any leaks in the piping.

Testing Your Installation

After completing the installation, it’s essential to test your vehicle to ensure everything is functioning correctly. Here’s what to do:

  • Start your vehicle and let it idle for a few minutes.
  • Check the temperature gauge to ensure it is within normal limits.
  • Take your vehicle for a test drive, monitoring performance.

Conclusion

Installing the Mishimoto FMIC Kit can significantly improve your vehicle’s performance. By following this step-by-step guide, even beginners can successfully complete the installation. Remember to perform regular checks and maintenance to ensure your intercooler operates efficiently.