Installing the Novitec R8 Supercharger System: a Comprehensive Step-by-step Guide

by

Installing the Novitec R8 Supercharger System can significantly enhance the performance of your Audi R8. This comprehensive guide will walk you through each step of the installation process to ensure you achieve the best results.

Tools and Materials Needed

Before beginning the installation, gather the following tools and materials:

  • Socket set
  • Torque wrench
  • Screwdrivers (flathead and Phillips)
  • Wrenches
  • Ratchet extensions
  • Novitec R8 Supercharger Kit
  • Coolant
  • Oil
  • Shop towels
  • Safety glasses

Preparation

Proper preparation is crucial for a successful installation. Follow these steps:

  • Park the vehicle on a flat surface and engage the parking brake.
  • Disconnect the battery by removing the negative terminal.
  • Drain the coolant from the cooling system.
  • Remove the engine cover to access the engine components.

Removing the Stock Components

To install the Novitec supercharger, you must first remove the stock components:

  • Remove the intake manifold by loosening the bolts and disconnecting the necessary hoses.
  • Take out the factory throttle body and set it aside.
  • Remove the stock air intake system.

Installing the Novitec Supercharger

Now that the stock components are removed, you can begin the installation of the Novitec supercharger:

  • Position the supercharger onto the engine block and secure it using the provided bolts.
  • Reconnect the throttle body to the supercharger.
  • Install the new air intake system included in the Novitec kit.
  • Connect all necessary hoses and ensure they are secured tightly.

Connecting the Cooling System

Proper cooling is essential for the performance of the supercharger:

  • Reconnect the coolant lines to the supercharger.
  • Ensure that all clamps are tight and secure.
  • Refill the cooling system with the appropriate coolant.

Final Steps

With the supercharger installed, follow these final steps to complete the process:

  • Reconnect the battery by attaching the negative terminal.
  • Start the engine and let it idle to check for any leaks.
  • Perform a test drive to ensure everything is functioning correctly.

Conclusion

Installing the Novitec R8 Supercharger System can transform your Audi R8 into a high-performance machine. By following this comprehensive step-by-step guide, you can ensure a successful installation and enjoy the enhanced power and performance of your vehicle.