Table of Contents
The Precision Turbos GT-R RB26 Turbo Kit is a popular upgrade for those looking to enhance the performance of their Nissan GT-R. This guide provides a complete step-by-step process for installing the turbo kit, ensuring that you have all the necessary information to complete the installation successfully.
Tools and Materials Needed
- Precision Turbos GT-R RB26 Turbo Kit
- Socket set
- Wrench set
- Screwdrivers
- Torque wrench
- Gasket scraper
- Engine oil
- Coolant
- Shop towels
- Safety glasses
Preparation
Before starting the installation, ensure you have a clean workspace and all necessary tools and materials at hand. It’s also recommended to familiarize yourself with the installation manual that comes with the turbo kit.
Safety Precautions
Always wear safety glasses when working on your vehicle. Ensure the car is parked on a flat surface and the engine is cool before beginning the installation process.
Step 1: Remove the Stock Turbo
Start by disconnecting the battery to prevent any electrical issues. Next, remove the intake piping and the exhaust manifold to access the stock turbo.
Disconnecting Components
- Remove the air intake duct.
- Disconnect the wastegate actuator.
- Unplug electrical connectors.
- Remove the oil feed line and return line.
Be sure to keep track of all bolts and connectors as you remove them.
Removing the Stock Turbo
Once all components are disconnected, remove the stock turbo from the manifold. This may require some gentle prying, but be careful not to damage any surrounding components.
Step 2: Prepare the New Turbo Kit
Before installing the new turbo, ensure that all gaskets and seals are in good condition. Replace any that show signs of wear or damage.
Check Components
- Inspect the new turbo for any defects.
- Check the wastegate for proper operation.
- Ensure all necessary fittings are included.
Step 3: Install the New Turbo
Begin by placing the new turbo onto the exhaust manifold. Ensure that the alignment is correct and that the turbo is seated properly.
Securing the Turbo
Using the bolts provided with the turbo kit, secure the turbo to the manifold. Follow the torque specifications provided in the kit’s manual to ensure a proper fit.
Step 4: Reconnect All Components
With the new turbo installed, begin reconnecting all components that were removed during the disassembly process. This includes the oil lines, intake piping, and electrical connectors.
Double-Check Connections
- Ensure all bolts are tightened to specification.
- Check that all hoses are securely attached.
- Verify that no tools are left in the engine bay.
Step 5: Fill Fluids
Before starting the engine, it’s essential to fill the engine with new oil and coolant. This ensures that the turbo operates correctly and prevents any damage during the initial startup.
Fluid Check
- Check the oil level and top off if necessary.
- Fill the coolant reservoir to the appropriate level.
Step 6: Start the Engine
Reconnect the battery and start the engine. Allow it to idle for a few minutes while checking for any leaks around the turbo and associated lines.
Monitor Performance
Observe the engine for any unusual noises or issues. If everything seems normal, take the vehicle for a short test drive to ensure the turbo is functioning correctly.
Conclusion
Installing the Precision Turbos GT-R RB26 Turbo Kit can significantly enhance your vehicle’s performance. By following this step-by-step guide, you can ensure a successful installation. Always refer to the specific instructions provided with your turbo kit for any additional details or specifications.