Table of Contents
Upgrading your BMW M4 with the Pure Turbos Stage 2 Turbo can significantly enhance its performance. This guide will walk you through the installation process, ensuring you achieve optimal boost and power gains.
What You Need Before You Start
Before diving into the installation, gather all necessary tools and components. Having everything ready will streamline the process.
- Pure Turbos Stage 2 Turbo Kit
- Basic hand tools (sockets, wrenches, screwdrivers)
- Torque wrench
- Jack and jack stands
- Coolant and oil
- New gaskets and seals
- Boost gauge (optional)
Preparing Your M4 for Installation
To ensure a smooth installation, follow these preparatory steps:
- Park your M4 on a flat surface.
- Disconnect the battery to prevent any electrical issues.
- Lift the front of the car using a jack and secure it with jack stands.
- Remove the front bumper for easier access to the turbo.
Removing the Stock Turbo
With the preparation complete, it’s time to remove the stock turbo. Follow these steps carefully:
- Disconnect the intake and exhaust piping from the stock turbo.
- Remove any heat shields that obstruct access.
- Unplug the electrical connectors from the turbo.
- Unbolt the turbo from the manifold and downpipe.
- Carefully lift the stock turbo out of the engine bay.
Installing the Pure Turbos Stage 2 Turbo
Now that the stock turbo is removed, it’s time to install the new Pure Turbos Stage 2 Turbo. Follow these steps:
- Position the new turbo in place, ensuring it aligns with the manifold and downpipe.
- Secure the turbo using the provided bolts, following the specified torque settings.
- Reconnect the electrical connectors and any necessary piping.
- Install new gaskets to prevent leaks.
- Reattach the heat shields if applicable.
Finalizing the Installation
With the turbo installed, you’ll need to wrap up the installation process:
- Reinstall the front bumper carefully.
- Reconnect the battery.
- Check all connections and fittings for security.
- Fill the coolant and oil to the appropriate levels.
Testing Your M4
Before hitting the road, it’s crucial to test your M4:
- Start the engine and let it idle for a few minutes.
- Check for any leaks or unusual noises.
- Monitor the boost levels using a gauge if installed.
- Take a short test drive to ensure everything is functioning correctly.
Conclusion
Installing the Pure Turbos Stage 2 Turbo on your M4 can dramatically improve its performance. By following this guide, you can ensure a successful upgrade that maximizes your vehicle’s boost and power gains.