Installing the Skunk2 Camshaft Kit: Step-by-step Guide to Gain 15-20 Hp on Your D-series Engine

by

Upgrading your D-series engine with a Skunk2 camshaft kit can significantly enhance performance, providing an increase of 15-20 horsepower. This step-by-step guide will walk you through the installation process, ensuring you achieve optimal results.

Tools and Materials Needed

  • Skunk2 Camshaft Kit
  • Socket set
  • Torque wrench
  • Screwdrivers
  • Engine oil
  • Timing belt tool
  • Gasket scraper
  • Clean rags
  • Safety goggles
  • Gloves

Preparation Steps

Before beginning the installation, ensure your workspace is clean and organized. Gather all tools and materials. Here are the preparation steps:

  • Disconnect the battery.
  • Remove the engine cover and intake manifold.
  • Drain the engine oil and coolant.
  • Remove the timing belt cover.

Removing the Old Camshaft

With the preparation complete, follow these steps to remove the old camshaft:

  • Align the engine to top dead center (TDC).
  • Remove the timing belt from the camshaft sprocket.
  • Unbolt the camshaft caps using the socket set.
  • Carefully lift the old camshaft out of the engine.

Installing the Skunk2 Camshaft

Now it’s time to install the Skunk2 camshaft. Follow these steps closely:

  • Apply a light coat of engine oil to the new camshaft.
  • Carefully place the new camshaft into the engine.
  • Reinstall the camshaft caps and torque them to the manufacturer’s specifications.
  • Reattach the camshaft sprocket to the new camshaft.

Reassembling the Engine

After installing the new camshaft, it’s time to reassemble the engine. Follow these steps:

  • Reinstall the timing belt, ensuring proper tension.
  • Replace the timing belt cover.
  • Reinstall the intake manifold and engine cover.
  • Refill the engine with oil and coolant.
  • Reconnect the battery.

Final Checks and Testing

Before taking your vehicle for a test drive, perform the following checks:

  • Check for any leaks around the camshaft area.
  • Verify that all bolts and screws are properly tightened.
  • Start the engine and let it idle to ensure smooth operation.
  • Take the car for a short drive to test the performance.

Conclusion

Installing the Skunk2 camshaft kit on your D-series engine can lead to significant power gains. By following this step-by-step guide, you can ensure a successful installation and enjoy the enhanced performance of your vehicle.