Table of Contents
Installing a high-flow exhaust system can significantly improve the performance of your Plymouth Road Runner. This guide will walk you through the process of installing the Summit Racing High-flow Exhaust with ease.
Tools and Materials Needed
- Summit Racing High-flow Exhaust Kit
- Socket set
- Wrench set
- Jack and jack stands
- Exhaust hanger removal tool
- Safety glasses
- Gloves
Before you begin, ensure you have all the necessary tools and materials ready. This preparation will make the installation process smoother and more efficient.
Preparation Steps
Start by preparing your workspace. Make sure you have ample room to work around your vehicle and that the area is well-ventilated.
1. Safety First
Before starting any work, put on your safety glasses and gloves. This will protect you from debris and sharp edges while you work on the exhaust system.
2. Lift the Vehicle
Using a jack, lift the Plymouth Road Runner and secure it with jack stands. Ensure the vehicle is stable before crawling underneath.
Removing the Old Exhaust System
With the vehicle securely lifted, you can begin removing the old exhaust system.
1. Locate the Exhaust Hangers
Identify the exhaust hangers that hold the old exhaust system in place. Use the exhaust hanger removal tool to detach them carefully.
2. Unbolt the Exhaust
Using your socket set, unbolt the exhaust system from the exhaust manifold and the catalytic converter. Be cautious as some bolts may be rusted.
3. Remove the Old Exhaust
Once unbolted, carefully remove the old exhaust system from the vehicle. You may need assistance to handle larger sections.
Installing the Summit Racing High-flow Exhaust
Now that the old exhaust system is removed, it’s time to install the new Summit Racing High-flow Exhaust.
1. Position the New Exhaust
Begin by positioning the new exhaust system under the vehicle. Align it with the exhaust manifold and catalytic converter.
2. Bolt the Exhaust in Place
Using the socket set, bolt the new exhaust system into place. Make sure to tighten the bolts securely but avoid over-tightening.
3. Reattach the Exhaust Hangers
Reattach the exhaust hangers to secure the new exhaust system. Ensure they are properly aligned and firmly in place.
Final Checks and Testing
After installation, it’s crucial to perform some final checks to ensure everything is secure and functioning correctly.
1. Inspect for Leaks
Start the engine and let it idle. Listen for any unusual sounds and check for exhaust leaks around the connections.
2. Check Clearance
Ensure that the new exhaust system has adequate clearance from any components to prevent contact during operation.
3. Test Drive
Take your Plymouth Road Runner for a test drive. Pay attention to the performance and sound of the new exhaust system.
Conclusion
Installing the Summit Racing High-flow Exhaust on your Plymouth Road Runner can enhance its performance and sound. By following this step-by-step guide, you can complete the installation with confidence and enjoy the improved driving experience.