Table of Contents
The GR Corolla is a remarkable vehicle, known for its agility and performance. However, for those looking to enhance its power output significantly, installing the Tial V-band Turbo Kit can lead to impressive gains of over 350 horsepower. This guide provides a step-by-step approach to installing the kit, ensuring you achieve optimal performance.
What You Will Need
- Tial V-band Turbo Kit
- Basic hand tools (wrenches, sockets, etc.)
- Torque wrench
- Oil and coolant
- Safety glasses and gloves
- Installation manual
Preparation
Before starting the installation, ensure your workspace is clean and organized. Gather all necessary tools and components. It’s also advisable to read through the installation manual provided with the Tial V-band Turbo Kit to familiarize yourself with the parts and the installation process.
Step 1: Remove the Stock Turbocharger
Begin by safely lifting the vehicle and securing it on jack stands. Disconnect the battery to prevent any electrical issues. Next, remove the stock turbocharger by following these sub-steps:
- Remove the intake piping connected to the stock turbo.
- Disconnect the exhaust downpipe from the turbo.
- Unplug any electrical connectors and sensors attached to the turbo.
- Remove the mounting bolts securing the turbo to the manifold.
- Carefully extract the turbo from the engine bay.
Step 2: Install the Tial V-band Turbo
With the stock turbo removed, it’s time to install the Tial V-band Turbo. Follow these steps for a proper installation:
- Position the Tial turbo in place, aligning it with the manifold.
- Secure the turbo using the provided mounting bolts, ensuring they are torqued to the manufacturer’s specifications.
- Connect the exhaust downpipe to the turbo, ensuring a snug fit.
- Install the intake piping, making sure all connections are tight and secure.
Step 3: Connect the Wastegate
The Tial V-band Turbo Kit includes a wastegate that must be connected properly to regulate boost pressure. Follow these instructions:
- Attach the wastegate to the designated port on the turbo.
- Secure it using the provided hardware.
- Connect the vacuum line from the wastegate to the intake manifold.
Step 4: Reconnect Electrical Components
After installing the turbo and wastegate, it’s crucial to reconnect any electrical components that were disconnected earlier. Ensure that:
- All sensors are plugged back in securely.
- Any wiring harnesses are routed properly and free from damage.
Step 5: Fill Fluids and Check for Leaks
Before starting the engine, fill the engine with fresh oil and coolant. After filling, inspect all connections for potential leaks:
- Check for oil leaks around the turbo and oil feed lines.
- Inspect coolant connections for any signs of leakage.
Step 6: Start the Engine
With everything installed and checked, it’s time to start the engine. Follow these steps:
- Reconnect the battery.
- Start the engine and let it idle for a few minutes.
- Monitor the oil pressure and check for any unusual noises.
Step 7: Tune the Vehicle
After confirming that the installation was successful and the engine is running smoothly, it’s essential to tune the vehicle to maximize performance. Consider the following:
- Use a reputable tuning software or consult a professional tuner.
- Adjust fuel maps and boost levels to ensure optimal performance.
Conclusion
Installing the Tial V-band Turbo Kit on your GR Corolla can significantly enhance its performance, providing you with an exhilarating driving experience. By following these steps, you can ensure a successful installation and unleash the full potential of your vehicle.