Installing the Toda Racing Stage 2 Camshaft Kit on the F20c: Boosting Power by 15% for Under $2,000

by

The F20C engine, known for its high-revving capabilities and impressive performance, is a favorite among car enthusiasts. One way to enhance the power output of this engine is by installing the Toda Racing Stage 2 Camshaft Kit. This modification can boost power by approximately 15% for under $2,000, making it an attractive option for those looking to improve their vehicle’s performance without breaking the bank.

Understanding the F20C Engine

The F20C engine, which powers the Honda S2000, is revered for its engineering excellence and performance characteristics. Here are some key features:

  • 2.0-liter inline-four engine
  • High-revving design with a redline of 8,800 RPM
  • DOHC VTEC technology for enhanced performance
  • Lightweight construction for improved handling

Benefits of Upgrading to the Toda Racing Stage 2 Camshaft Kit

The Toda Racing Stage 2 Camshaft Kit is designed to optimize the performance of the F20C engine. Here are some benefits of this upgrade:

  • Increased horsepower: Expect a power increase of around 15%.
  • Improved torque: Enhanced torque delivery throughout the RPM range.
  • Better throttle response: Quicker acceleration and improved engine responsiveness.
  • Enhanced sound: A more aggressive engine note that enthusiasts will appreciate.

Preparing for Installation

Before diving into the installation process, it’s essential to gather the necessary tools and materials. Here’s what you’ll need:

  • Socket set
  • Torque wrench
  • Screwdrivers (flat and Phillips)
  • Camshaft timing tool
  • New gaskets and seals
  • Engine oil and assembly lube

Step-by-Step Installation Guide

1. Remove the Engine Cover

Start by removing the engine cover to access the camshaft area. This usually involves unscrewing several bolts and carefully lifting off the cover.

2. Disconnect the Battery

For safety, disconnect the negative terminal of the battery to prevent any electrical issues during installation.

3. Remove the Valve Cover

Carefully remove the valve cover by unscrewing the bolts. Make sure to replace any gaskets to prevent leaks upon reassembly.

4. Set the Engine to Top Dead Center (TDC)

Using the camshaft timing tool, ensure that the engine is set to TDC. This step is crucial for proper camshaft alignment during installation.

5. Remove the Old Camshafts

Unbolt the existing camshafts and carefully remove them from the engine. Take note of the positioning and orientation for reinstallation.

6. Install the Toda Racing Stage 2 Camshafts

Place the new Toda Racing camshafts into the engine, ensuring they are correctly aligned. Torque the bolts to the manufacturer’s specifications.

7. Reinstall the Valve Cover

Once the new camshafts are in place, reinstall the valve cover with new gaskets to ensure a proper seal.

8. Reconnect the Battery

Reconnect the battery and ensure all connections are secure before starting the engine.

Testing the Upgrade

After installation, it’s essential to test the engine to ensure everything is functioning correctly. Here are some steps to follow:

  • Start the engine and listen for any unusual noises.
  • Check for oil leaks around the valve cover and camshaft area.
  • Take the car for a test drive to feel the improvements in power and throttle response.

Conclusion

Installing the Toda Racing Stage 2 Camshaft Kit on the F20C is a cost-effective way to enhance performance. With an increase of around 15% in power and improved throttle response, this upgrade is well worth the investment for enthusiasts looking to get more out of their Honda S2000. Always ensure proper installation and testing for the best results.