Table of Contents
Invidia Civic Type R Exhaust Installation: Step-by-Step Guide for a Perfect Fit
The Invidia Civic Type R exhaust system is a popular upgrade for enthusiasts looking to enhance performance and sound. This guide will walk you through the installation process step-by-step, ensuring a perfect fit for your vehicle.
Tools and Materials Needed
- Invidia Civic Type R Exhaust System
- Socket set
- Wrench set
- Torque wrench
- Jack and jack stands
- Safety glasses
- Gloves
- Anti-seize compound
Preparation Steps
Before starting the installation, ensure your vehicle is parked on a level surface and the engine is cool. Gather all necessary tools and materials to streamline the process.
1. Safety First
Put on your safety glasses and gloves to protect yourself during the installation. Make sure to work in a well-ventilated area to avoid inhaling exhaust fumes.
2. Lift the Vehicle
Use a jack to lift the rear of the vehicle. Secure it with jack stands to ensure stability while you work underneath the car.
Removing the Stock Exhaust
To install the Invidia exhaust, you must first remove the stock exhaust system. Follow these steps carefully.
1. Locate the Exhaust Hangars
Identify the hangars that support the stock exhaust. You will need to detach the exhaust from these hangars during removal.
2. Remove the Exhaust Clamps
Using your socket set, loosen and remove the clamps that secure the stock exhaust to the catalytic converter and the mid-pipe.
3. Detach the Exhaust from the Hangars
Carefully slide the exhaust out of the hangars. You may need to twist and maneuver it to free it completely.
4. Remove the Stock Exhaust
Once detached from the hangars and clamps, remove the stock exhaust system from the vehicle. Set it aside for future use or disposal.
Installing the Invidia Exhaust
Now that the stock exhaust is removed, it’s time to install the Invidia exhaust system. Follow these steps for a successful installation.
1. Align the Invidia Exhaust
Position the Invidia exhaust under the vehicle, aligning it with the mounting points where the stock exhaust was previously attached.
2. Attach the Exhaust to the Catalytic Converter
Using the provided clamps, attach the Invidia exhaust to the catalytic converter. Ensure a tight fit to prevent leaks.
3. Secure the Exhaust to the Hangars
Slide the exhaust into the hangars, ensuring it is properly supported. Make sure it is aligned correctly to avoid any contact with the undercarriage.
4. Tighten All Clamps and Bolts
Using your torque wrench, tighten all clamps and bolts to the manufacturer’s specifications. This step is crucial for a secure installation.
Final Checks
After installing the Invidia exhaust, it’s important to perform a few final checks to ensure everything is in order.
1. Inspect for Leaks
Start the engine and let it idle. Listen for any unusual sounds and check for exhaust leaks around the joints and connections.
2. Check Alignment
Ensure that the exhaust is properly aligned and does not touch any parts of the vehicle. Adjust if necessary.
3. Lower the Vehicle
Once everything checks out, carefully lower the vehicle back to the ground and remove the jack stands.
Conclusion
Installing the Invidia Civic Type R exhaust can greatly enhance your vehicle’s performance and sound. By following this step-by-step guide, you can ensure a perfect fit and enjoy the benefits of your new exhaust system.