Table of Contents
Installing KW coilovers on your vehicle can significantly enhance its performance on road courses. This guide will take you through the step-by-step process of installation, ensuring you achieve the best results for your driving experience.
Understanding KW Coilovers
KW coilovers are renowned for their quality and performance. They allow for adjustable ride height and damping, which can be tailored to suit specific driving styles and conditions. Here are some benefits of using KW coilovers:
- Enhanced Handling: Improves cornering stability and grip.
- Adjustable Height: Customize your vehicle’s stance for aesthetics and performance.
- Improved Comfort: Better damping characteristics for everyday driving.
Tools and Materials Needed
Before you start the installation process, gather the following tools and materials:
- KW coilover kit
- Jack and jack stands
- Wrenches and sockets
- Torque wrench
- Spring compressor
- Penetrating oil
- Safety glasses and gloves
Step-by-Step Installation Process
Step 1: Prepare Your Vehicle
Ensure your vehicle is parked on a flat surface and engage the parking brake. Loosen the lug nuts on the wheels but do not remove them yet.
Step 2: Lift the Vehicle
Use the jack to lift the front or rear of the vehicle, depending on which coilovers you are installing. Secure the vehicle with jack stands for safety.
Step 3: Remove the Wheels
Now, remove the loosened lug nuts and take off the wheels to access the suspension components.
Step 4: Remove the Old Struts
Using the appropriate wrenches and sockets, disconnect the old struts from the vehicle. This may involve removing bolts from the top of the strut tower and the lower control arm.
Step 5: Install the KW Coilovers
Carefully position the KW coilovers into place. Secure the top mount first, followed by the lower mount. Ensure all bolts are tightened to the manufacturer’s specifications using a torque wrench.
Step 6: Adjust Ride Height
Before reinstalling the wheels, adjust the ride height of the coilovers to your desired setting. Make sure to follow the guidelines provided in the KW installation manual.
Step 7: Reinstall the Wheels
Place the wheels back onto the hub, hand-tightening the lug nuts before lowering the vehicle back to the ground.
Step 8: Final Tightening
Once the vehicle is back on the ground, use the torque wrench to fully tighten the lug nuts to the manufacturer’s specifications.
Step 9: Test Drive
After installation, take your vehicle for a test drive. Pay attention to how it handles and make any necessary adjustments to the coilovers to achieve the desired performance.
Performance Boosts from KW Coilovers
Upgrading to KW coilovers can result in significant performance improvements, especially on road courses. Here are some key benefits:
- Better Cornering: Improved grip and stability during turns.
- Reduced Body Roll: Enhanced control and balance in corners.
- Faster Lap Times: Increased confidence leads to quicker driving.
Conclusion
Installing KW coilovers is an excellent way to enhance your vehicle’s performance on road courses. By following this step-by-step guide, you can ensure a successful installation and enjoy the benefits of improved handling and stability.