Table of Contents
The Lexus RC-F is a remarkable sports coupe known for its powerful performance and sleek design. However, for enthusiasts looking to enhance handling capabilities, upgrading the suspension is a key modification. One of the most popular choices among car aficionados is the KW V3 coilover system. This article will explore the benefits of installing KW V3 coilovers on your Lexus RC-F, provide installation tips, and discuss the associated costs.
Benefits of KW V3 Coilovers
KW V3 coilovers are renowned for their adjustable features and superior performance. Here are some benefits of upgrading to this suspension system:
- Improved Handling: The adjustable damping allows for a tailored ride experience, enhancing cornering stability.
- Lower Ride Height: Lowering the vehicle’s center of gravity improves handling dynamics.
- Customizable Settings: The ability to adjust compression and rebound settings enables drivers to fine-tune their suspension for different driving conditions.
- Enhanced Aesthetics: A lowered stance can significantly improve the visual appeal of the RC-F.
Installation Tips for KW V3 Coilovers
Installing KW V3 coilovers on your Lexus RC-F can be a rewarding project. However, it requires careful attention to detail. Here are some tips to ensure a successful installation:
Preparation
Before beginning the installation, gather all necessary tools and equipment. This typically includes:
- Jack and jack stands
- Socket set
- Torque wrench
- Spring compressor
- Pliers and wrenches
Step-by-Step Installation
Follow these steps to install the KW V3 coilovers:
- Raise the Vehicle: Use a jack to lift the RC-F and secure it with jack stands.
- Remove the Wheels: Take off the front and rear wheels to access the suspension components.
- Disconnect the Stock Suspension: Remove the bolts securing the stock struts and springs.
- Install KW Coilovers: Position the KW coilovers in place and secure them with the provided hardware.
- Adjust Ride Height: Set the desired ride height before tightening all bolts.
- Reattach Wheels: Put the wheels back on and lower the vehicle.
- Test Drive: Take the car for a test drive to ensure everything is functioning correctly.
Cost of KW V3 Coilovers
The cost of upgrading to KW V3 coilovers can vary based on several factors, including where you purchase them and whether you choose to have them installed professionally. Here’s a breakdown of potential costs:
- Coilover Kit Price: The KW V3 coilover kit typically ranges from $2,500 to $3,000, depending on the retailer.
- Installation Costs: If you opt for professional installation, expect to pay between $300 and $600.
- Additional Parts: Consider any additional parts or modifications that may be needed, such as camber plates or alignment services.
Conclusion
Upgrading to KW V3 coilovers can significantly enhance the handling and performance of your Lexus RC-F. With adjustable settings and improved ride quality, these coilovers are a worthwhile investment for any enthusiast. By following the installation tips outlined above and considering the associated costs, you can make an informed decision about this modification.