Table of Contents
Maximize Your Power: A 400-HP Gain with the Aeromotive E85 Fuel System Upgrade
The quest for higher performance in automotive engineering often leads enthusiasts to explore various upgrades. One of the most effective upgrades available today is the Aeromotive E85 Fuel System. This system is designed to maximize your vehicle’s power output, potentially adding up to 400 horsepower when paired with the right engine modifications.
Understanding E85 Fuel
E85 is a fuel blend consisting of 85% ethanol and 15% gasoline. This high-ethanol content allows for a higher octane rating, which can lead to more power and efficiency in high-performance engines. However, to fully utilize E85, a dedicated fuel system is essential.
Benefits of E85 Fuel
- Higher Octane Rating: E85 typically has an octane rating of 100-105, allowing for more aggressive tuning.
- Increased Power: The potential for significant horsepower gains when properly tuned.
- Cleaner Combustion: Ethanol burns cleaner than traditional gasoline, resulting in reduced emissions.
The Aeromotive E85 Fuel System Upgrade
The Aeromotive E85 Fuel System is specifically designed to handle the unique properties of E85 fuel. It includes high-flow fuel pumps, injectors, and all necessary components to ensure optimal performance and reliability.
Key Components of the Upgrade
- Fuel Pumps: High-capacity pumps that can deliver the necessary flow rate for increased horsepower.
- Fuel Injectors: Larger injectors that provide the right fuel volume for E85’s higher demands.
- Fuel Lines: Upgraded lines that can withstand the corrosive nature of ethanol.
Installation Process
Installing the Aeromotive E85 Fuel System requires careful planning and execution. While some experienced enthusiasts may attempt this as a DIY project, it is recommended to seek professional assistance to ensure proper installation and tuning.
Steps for Installation
- Remove the Existing Fuel System: Safely disconnect and remove the stock fuel system components.
- Install New Fuel Pumps: Position and secure the high-flow pumps in place.
- Upgrade Fuel Lines: Replace old lines with new, ethanol-compatible lines.
- Install Fuel Injectors: Fit the larger injectors into the engine’s intake system.
- Tuning: Adjust the engine’s ECU for optimal performance with E85 fuel.
Tuning for Maximum Performance
After installing the Aeromotive E85 Fuel System, tuning is crucial. The engine’s ECU must be recalibrated to accommodate the different fuel characteristics of E85. Proper tuning will unlock the full potential of the upgrade, ensuring reliability and performance gains.
Considerations for Tuning
- Air-Fuel Ratio: Monitor and adjust the air-fuel ratio for optimal combustion.
- Ignition Timing: Modify ignition timing to take advantage of E85’s higher octane.
- Boost Levels: If applicable, increase boost levels for turbocharged applications.
Conclusion
The Aeromotive E85 Fuel System Upgrade is an excellent choice for those looking to maximize their vehicle’s power output. With the potential for a 400-hp gain, this upgrade not only enhances performance but also promotes cleaner combustion. By understanding the benefits of E85 fuel, the components of the Aeromotive system, and the importance of proper installation and tuning, automotive enthusiasts can achieve impressive results.
For anyone serious about performance upgrades, the Aeromotive E85 Fuel System is a game changer that can transform your driving experience.