Table of Contents
The Mishimoto Cold Air Intake is a popular upgrade for the GR Corolla G16E-GTS, enhancing performance and engine sound. This guide will walk you through the installation process step-by-step, along with a cost breakdown to help you plan your project.
Tools and Materials Needed
- Mishimoto Cold Air Intake Kit
- Socket wrench set
- Flathead screwdriver
- Phillips screwdriver
- Torque wrench
- Rubber gloves
- Shop towels
- Safety glasses
Before starting the installation, gather all tools and materials to ensure a smooth process. Make sure to wear safety glasses and gloves for protection.
Cost Breakdown
Understanding the costs involved can help you budget for this upgrade. Below is a breakdown of the expected expenses:
- Mishimoto Cold Air Intake Kit: $299.99
- Tools (if not already owned): $50.00
- Miscellaneous supplies (shop towels, gloves): $10.00
Total Estimated Cost: $359.99
Step-by-Step Installation Process
Step 1: Prepare the Vehicle
Begin by parking the vehicle on a flat surface and turning off the ignition. Allow the engine to cool completely before proceeding.
Step 2: Remove the Stock Air Intake
Using a socket wrench, remove the bolts securing the stock air intake. Disconnect any electrical connectors and hoses attached to the intake. Carefully lift out the stock air intake system.
Step 3: Install the Mishimoto Cold Air Intake
Position the Mishimoto Cold Air Intake in place. Ensure it aligns with the mounting points. Secure it using the provided bolts and fittings. Reconnect any electrical connectors and hoses that were disconnected during removal.
Step 4: Check for Proper Fitment
Double-check that all connections are secure and that the intake is properly positioned. Make adjustments as necessary to prevent any contact with other engine components.
Step 5: Final Inspection
Perform a final inspection of the installation. Ensure that there are no loose parts and that everything is tightened to the manufacturer’s specifications. Start the engine and listen for any unusual sounds.
Conclusion
The installation of the Mishimoto Cold Air Intake on the GR Corolla G16E-GTS can be accomplished with basic tools and mechanical knowledge. Following this step-by-step guide will help ensure a successful upgrade, enhancing both performance and driving experience.