Table of Contents
The NA Miata is a beloved platform for enthusiasts looking to enhance performance and driving experience. One popular upgrade is the installation of Skunk2 camshafts, known for their ability to significantly increase power and torque. This article will explore the power gains, installation tips, and pricing associated with Skunk2 camshafts for the NA Miata.
Power Gains from Skunk2 Camshafts
When it comes to enhancing the performance of your NA Miata, Skunk2 camshafts are a top choice. These camshafts are designed to optimize airflow and improve engine efficiency, resulting in noticeable power gains. Here’s what you can expect:
- Increased Horsepower: Users report gains of 10-20 horsepower depending on the specific camshaft and supporting modifications.
- Improved Torque: Enhanced torque delivery across the RPM range, making the car feel more responsive.
- Better Throttle Response: Upgraded camshafts provide a more engaging driving experience with quicker throttle response.
Installation Tips for Skunk2 Camshafts
Installing Skunk2 camshafts in your NA Miata can be a rewarding project, but it requires careful attention to detail. Here are some tips to ensure a successful installation:
Preparation
Before starting the installation, gather all necessary tools and parts. A complete list includes:
- Socket set
- Torque wrench
- Camshaft installation tool
- New camshaft seals
- Gasket sealant
Step-by-Step Installation
Follow these steps for a successful camshaft installation:
- Remove the valve cover: Start by disconnecting all electrical connectors and hoses attached to the valve cover.
- Remove the timing belt: Align the timing marks and carefully remove the timing belt.
- Remove the old camshafts: Unbolt the camshaft caps and lift out the old camshafts.
- Install new camshafts: Carefully place the Skunk2 camshafts in position and secure them with the camshaft caps.
- Reinstall the timing belt: Ensure the timing marks are aligned before reinstalling the timing belt.
- Replace the valve cover: Use new gaskets and sealant to prevent any leaks.
Tuning Considerations
After installation, it’s essential to tune your engine to take full advantage of the new camshafts. Consider the following:
- ECU Reflash: A reflash or standalone ECU may be necessary to optimize fuel and timing maps.
- Dyno Tuning: A dyno session can help fine-tune engine performance and ensure safe operating conditions.
Pricing for Skunk2 Camshafts
The cost of Skunk2 camshafts can vary based on the model and retailer. Here’s a breakdown of what you can expect:
- Camshaft Set: Prices typically range from $500 to $800 for a complete set of camshafts.
- Installation Costs: If you’re not installing them yourself, expect to pay between $300 and $600 for professional installation.
- Tuning Costs: A professional tuning session can range from $200 to $500, depending on the complexity.
Conclusion
Upgrading to Skunk2 camshafts is a fantastic way to enhance the performance of your NA Miata. With significant power gains, improved throttle response, and the right installation techniques, you can elevate your driving experience. Be sure to consider the costs associated with parts, installation, and tuning to ensure a smooth transition to your new performance setup.