Table of Contents
The Chevrolet Silverado 2.7 Turbo has gained popularity among truck enthusiasts for its impressive balance of power and efficiency. However, for those looking to boost performance even further, upgrading to a performance camshaft can make a significant difference. In this article, we will explore the benefits of installing the COMP Cams 270H camshaft and guide you through the installation process.
Understanding Performance Camshafts
Performance camshafts are designed to optimize engine performance by altering the timing and duration of the intake and exhaust valves. This modification can lead to improved horsepower and torque, especially at higher RPMs. The COMP Cams 270H camshaft is specifically engineered for the Silverado 2.7 Turbo, providing a great balance between performance and drivability.
Benefits of Upgrading to COMP Cams 270H
Installing the COMP Cams 270H camshaft can yield several advantages:
- Increased Horsepower: The 270H camshaft enhances airflow, leading to higher horsepower gains.
- Improved Torque: The camshaft’s design promotes better torque delivery, especially in the mid-range.
- Better Throttle Response: Upgrading the camshaft results in a more responsive engine, improving overall driving experience.
- Enhanced Sound: A performance camshaft can give your Silverado a more aggressive exhaust note.
Tools and Materials Needed
Before starting the installation, gather the following tools and materials:
- Socket set
- Torque wrench
- Camshaft installation tool
- Gasket scraper
- Engine oil
- COMP Cams 270H camshaft
- New gaskets and seals
- Shop manual for torque specifications
Installation Process
Step 1: Prepare the Engine
Start by disconnecting the battery and removing any components that obstruct access to the camshaft. This may include the intake manifold, valve covers, and timing cover. Ensure that you have a clean workspace to avoid contamination.
Step 2: Remove the Old Camshaft
Once you have access to the camshaft, carefully remove the old camshaft by following these steps:
- Remove the timing chain or belt.
- Unbolt the camshaft from the engine block.
- Carefully slide the old camshaft out of the engine.
Step 3: Install the COMP Cams 270H Camshaft
With the old camshaft removed, it’s time to install the new COMP Cams 270H:
- Apply engine oil to the new camshaft’s bearings.
- Carefully slide the new camshaft into the engine block.
- Secure the camshaft with the appropriate bolts, following the torque specifications from your shop manual.
Step 4: Reassemble the Engine
After the camshaft is installed, reassemble the engine by reversing the disassembly steps. Make sure to replace any gaskets or seals that were removed to prevent leaks.
Step 5: Final Checks
Before starting the engine, double-check all connections and ensure everything is properly torqued. Reconnect the battery and prepare to start your Silverado.
Post-Installation Considerations
After installing the COMP Cams 270H camshaft, it’s essential to monitor your engine’s performance. Here are some tips:
- Run a break-in period: Allow your engine to adjust to the new camshaft by following the manufacturer’s recommendations.
- Check for leaks: Inspect the engine for any oil or coolant leaks after installation.
- Consider a tune: A performance tune may be necessary to maximize the benefits of your new camshaft.
Conclusion
Upgrading to the COMP Cams 270H camshaft is an excellent way to enhance the performance of your Chevrolet Silverado 2.7 Turbo. With improved horsepower, torque, and throttle response, this modification can take your truck to the next level. Follow the installation steps carefully, and enjoy the benefits of your new camshaft!