Table of Contents
The NC Miata is known for its lightweight design and spirited driving experience. One of the popular modifications among enthusiasts is the CorkSport Power Series Intake. This article discusses the performance testing of this intake system, along with installation tips for those looking to enhance their Miata’s performance.
Understanding the CorkSport Power Series Intake
The CorkSport Power Series Intake is designed to improve airflow to the engine, resulting in better performance and throttle response. The intake features a larger diameter piping and a high-flow air filter, which can contribute to an increase in horsepower and torque.
Performance Testing Methodology
To evaluate the performance of the CorkSport Power Series Intake, a series of tests were conducted under controlled conditions. The testing involved measuring horsepower and torque before and after the installation of the intake system.
Pre-Installation Baseline Measurements
Before the installation, baseline measurements were taken using a dynamometer. The following results were recorded:
- Horsepower: 130 hp at the wheels
- Torque: 110 lb-ft at the wheels
Post-Installation Measurements
After installing the CorkSport Power Series Intake, the vehicle was tested again under the same conditions. The results showed a noticeable improvement:
- Horsepower: 140 hp at the wheels
- Torque: 115 lb-ft at the wheels
Performance Gains
The performance gains from the CorkSport Power Series Intake were significant, providing an increase of 10 horsepower and 5 lb-ft of torque. These improvements enhance the overall driving experience, making the NC Miata even more responsive and enjoyable to drive.
Installation Tips
Installing the CorkSport Power Series Intake can be straightforward if you follow these tips:
- Gather Tools: Ensure you have the necessary tools, including a socket set, screwdrivers, and pliers.
- Read Instructions: Carefully read the installation manual provided by CorkSport.
- Disconnect Battery: Always disconnect the battery before starting the installation to avoid any electrical issues.
- Remove Stock Intake: Carefully remove the stock intake system, taking note of how everything is connected.
- Install New Intake: Follow the instructions to install the new intake, ensuring all connections are secure.
- Check for Leaks: After installation, check for any air leaks to ensure optimal performance.
Conclusion
The CorkSport Power Series Intake is a worthwhile upgrade for NC Miata owners looking to enhance their vehicle’s performance. With measurable gains in horsepower and torque, along with a straightforward installation process, this intake system can significantly improve the driving experience.