Table of Contents
Upgrading your vehicle’s braking system is essential for enhancing track performance and ensuring fade resistance. One of the most recommended options for performance enthusiasts is the EBC Yellowstuff compound. This article will guide you through the process of performing a brake upgrade using EBC Yellowstuff pads, highlighting the benefits and steps involved.
Understanding EBC Yellowstuff Compound
EBC Yellowstuff is a high-friction brake pad compound designed for track use. It offers excellent performance under high temperatures and provides superior stopping power compared to standard pads. Here are some key features:
- High friction coefficient for improved braking.
- Fade resistance at high temperatures.
- Minimal dust production for cleaner wheels.
- Long lifespan compared to traditional pads.
Benefits of Upgrading to EBC Yellowstuff
Switching to EBC Yellowstuff pads can significantly enhance your vehicle’s performance on the track. Here are some benefits:
- Improved Stopping Power: EBC Yellowstuff pads provide a noticeable increase in stopping distance, allowing for quicker deceleration.
- Fade Resistance: These pads maintain their performance even under extreme conditions, reducing the risk of brake fade during long sessions.
- Better Modulation: The pads offer improved pedal feel, allowing drivers to apply the brakes more precisely.
- Lower Dust Levels: EBC Yellowstuff pads produce less dust, helping keep your wheels cleaner for longer.
Tools and Materials Needed
Before starting your brake upgrade, ensure you have the following tools and materials:
- Socket set
- Torque wrench
- Jack and jack stands
- Brake cleaner
- New EBC Yellowstuff brake pads
- Brake grease
- Safety glasses and gloves
Step-by-Step Brake Upgrade Process
1. Prepare Your Vehicle
Ensure your vehicle is parked on a flat surface. Engage the parking brake and wear safety glasses and gloves. Loosen the lug nuts on the wheels you will be working on.
2. Lift the Vehicle
Using a jack, lift the vehicle and secure it with jack stands. Remove the wheels to access the brake calipers.
3. Remove the Old Brake Pads
Locate the brake caliper and remove the bolts holding it in place. Carefully slide the caliper off the rotor. Remove the old brake pads from the caliper bracket.
4. Clean the Braking Surface
Use brake cleaner to clean the rotor and caliper bracket. Ensure there is no debris or old pad material left behind.
5. Install the EBC Yellowstuff Brake Pads
Apply a thin layer of brake grease to the back of the new EBC Yellowstuff pads. Install the pads into the caliper bracket, ensuring they are positioned correctly.
6. Reattach the Caliper
Carefully slide the caliper back over the new pads and rotor. Reinstall the caliper bolts and tighten them to the manufacturer’s specifications using a torque wrench.
7. Reinstall the Wheels
Place the wheels back onto the hub and hand-tighten the lug nuts. Lower the vehicle back to the ground and use a torque wrench to tighten the lug nuts to the recommended specifications.
8. Test the Brakes
Before hitting the track, pump the brake pedal a few times to ensure the pads are seated properly. Test the brakes at low speeds to ensure they are functioning correctly.
Conclusion
Upgrading to EBC Yellowstuff brake pads is a smart choice for any track enthusiast looking to improve performance and fade resistance. By following the steps outlined in this guide, you can successfully perform a brake upgrade that enhances your vehicle’s capabilities on the track.