Power Mod Guide: Installing a Jlt Cold Air Intake and Procharger Supercharger to Reach 750+ Hp on Your Redeye

by

In the world of automotive performance, achieving significant horsepower gains is a goal for many enthusiasts. This guide will walk you through the process of installing a JLT Cold Air Intake and a ProCharger Supercharger on your Dodge Challenger Redeye to help you reach 750+ horsepower. With the right tools and a bit of patience, you can enhance your vehicle’s performance and enjoy the thrill of increased power.

Understanding the Components

Before diving into the installation, it’s essential to understand the components involved in this power modification. The JLT Cold Air Intake and ProCharger Supercharger work together to increase airflow and boost, leading to significant horsepower gains.

  • JLT Cold Air Intake: This intake system increases the amount of cool air entering the engine, which improves combustion efficiency.
  • ProCharger Supercharger: A centrifugal supercharger that compresses air and delivers it to the engine, significantly increasing horsepower.

Tools and Materials Needed

Gathering the right tools and materials is crucial for a successful installation. Here’s a list of what you’ll need:

  • Socket set
  • Wrenches
  • Torque wrench
  • Flathead screwdriver
  • Phillips screwdriver
  • Drill with drill bits
  • JLT Cold Air Intake kit
  • ProCharger Supercharger kit
  • Automotive lubricant
  • Safety glasses

Installation Steps

Step 1: Preparing Your Vehicle

Start by parking your Redeye on a flat surface and ensuring the engine is cool. Disconnect the negative battery terminal to prevent any electrical issues during the installation process.

Step 2: Removing the Stock Air Intake

To install the JLT Cold Air Intake, you need to remove the stock air intake system. Follow these steps:

  • Loosen the clamps securing the stock intake to the throttle body.
  • Disconnect any sensors attached to the intake.
  • Remove the intake by pulling it out carefully.

Step 3: Installing the JLT Cold Air Intake

With the stock intake removed, you can now install the JLT Cold Air Intake:

  • Position the JLT intake in place and secure it to the throttle body using the provided clamps.
  • Reconnect any sensors that were disconnected during removal.
  • Ensure all connections are tight and secure.

Step 4: Preparing for the ProCharger Installation

Next, you will prepare your vehicle for the ProCharger Supercharger installation. This involves removing some components to gain access to the engine.

  • Remove the front bumper and grille to access the engine bay more easily.
  • Disconnect the serpentine belt from the engine.
  • Remove any components that obstruct the supercharger installation, such as the factory intake manifold.

Step 5: Installing the ProCharger Supercharger

Now it’s time to install the ProCharger Supercharger:

  • Mount the supercharger bracket to the engine using the provided hardware.
  • Attach the ProCharger unit to the bracket securely.
  • Connect the supercharger to the intake system, ensuring all hoses are tight.

Step 6: Reassembling the Vehicle

After the supercharger is installed, it’s time to reassemble your vehicle:

  • Reinstall the factory intake manifold if removed.
  • Reconnect the serpentine belt.
  • Reattach the front bumper and grille.

Tuning Your Redeye

Once the installation is complete, tuning is essential to ensure your vehicle runs smoothly with the new modifications. A professional tune will optimize the air-fuel mixture and timing, allowing you to achieve the desired horsepower levels.

Testing and Safety Checks

Before hitting the road, conduct thorough testing and safety checks:

  • Check for any leaks in the intake and supercharger system.
  • Ensure all electrical connections are secure.
  • Start the engine and listen for any unusual noises.

Final Thoughts

Installing a JLT Cold Air Intake and ProCharger Supercharger on your Dodge Challenger Redeye can significantly enhance its performance, allowing you to reach 750+ horsepower. With careful installation, proper tuning, and thorough safety checks, you can enjoy the thrill of driving a high-performance vehicle that stands out on the road.