Table of Contents
The ProCharger HPE900 supercharger is a powerful addition for those looking to significantly boost the horsepower of their vehicle. This installation guide will walk you through each step, ensuring you achieve over 150 horsepower gains.
Tools and Materials Needed
- ProCharger HPE900 supercharger kit
- Socket set (metric and standard)
- Torque wrench
- Wrenches (various sizes)
- Drill with bits
- Vacuum hose
- Coolant
- Oil for supercharger
- Safety glasses and gloves
Preparation Steps
Before starting the installation, ensure you have a clean workspace. Gather all tools and materials listed above. It’s also advisable to read through the ProCharger manual thoroughly to understand the installation process and safety precautions.
Disconnect the Battery
To prevent any electrical issues, disconnect the negative terminal of the battery. This step is crucial for your safety during the installation.
Remove the Stock Components
Begin by removing the stock intake system, including the air filter, intake tube, and throttle body. Keep track of all nuts and bolts for reinstallation.
Installing the Procharger HPE900
Once the stock components are removed, it’s time to install the ProCharger HPE900. Follow these steps carefully to ensure a successful installation.
Mount the Supercharger Bracket
Start by mounting the supercharger bracket onto the engine. Use the provided bolts and ensure they are tightened to the manufacturer’s specifications.
Install the Supercharger Unit
Next, position the ProCharger unit onto the bracket. Secure it with the supplied hardware, making sure everything is aligned correctly.
Connect the Intake Piping
Connect the intake piping from the supercharger to the throttle body. Use clamps to secure the connections and prevent any air leaks.
Install the Fuel System Components
Upgrade the fuel system by installing the larger injectors and fuel pump included in the kit. Ensure all connections are tight to avoid fuel leaks.
Final Steps
With the supercharger installed, it’s time to finalize the installation process.
Reconnect the Battery
Reconnect the negative terminal of the battery. Ensure all tools are removed from the engine bay before starting the vehicle.
Check for Leaks
Start the engine and let it idle. Check for any leaks in the fuel system or intake piping. If everything looks good, proceed to the next step.
Test Drive
Take the vehicle for a test drive to feel the power of the new supercharger. Monitor the gauges and ensure everything is functioning correctly.
Tuning Your Vehicle
To maximize the performance gains from your ProCharger HPE900, it’s essential to tune your vehicle properly. This step will ensure that the engine runs efficiently with the added power.
ECU Tuning
Consider having your ECU tuned by a professional. This will optimize fuel maps and ignition timing to accommodate the increased airflow from the supercharger.
Monitoring Performance
After tuning, monitor your vehicle’s performance. Keep an eye on boost levels, air-fuel ratios, and engine temperatures to ensure everything is operating within safe limits.
Maintenance Tips
Maintaining your ProCharger HPE900 is crucial for longevity and performance. Here are some tips to keep it running smoothly.
- Regularly check and change the supercharger oil as recommended by the manufacturer.
- Inspect the intake system for any leaks or damage.
- Keep the air filter clean and replace it when necessary.
- Schedule regular tune-ups to keep the engine running efficiently.
Conclusion
Installing the ProCharger HPE900 supercharger can yield impressive horsepower gains, transforming your vehicle’s performance. By following this step-by-step guide and maintaining your system, you can enjoy the benefits of enhanced power for years to come.