Table of Contents
The Infiniti Q50 Red Sport is known for its powerful performance and sleek design. However, many enthusiasts look to enhance its handling and stance further. One popular modification is the installation of a Nismo lowering kit. This article will guide you through the process of installing a Nismo lowering kit to improve your Q50’s stance and handling.
Why Choose a Nismo Lowering Kit?
A Nismo lowering kit offers several advantages for Q50 Red Sport owners:
- Improved Handling: Lowering your vehicle’s center of gravity enhances stability during cornering.
- Better Stance: A lower ride height gives your Q50 a more aggressive and sporty appearance.
- Enhanced Performance: The kit is designed to work with the vehicle’s suspension, providing optimized performance.
- Quality Assurance: Nismo parts are engineered for durability and reliability.
Tools and Materials Needed
Before beginning the installation, gather the following tools and materials:
- Jack and jack stands
- Socket set
- Wrench set
- Torque wrench
- Nismo lowering kit
- Spring compressors (optional but recommended)
- Safety glasses
- Gloves
Step-by-Step Installation Guide
Step 1: Prepare the Vehicle
Start by parking your Q50 on a flat surface and engaging the parking brake. Loosen the lug nuts on the wheels but do not remove them yet.
Step 2: Lift the Vehicle
Using a jack, lift the front or rear of the vehicle and secure it with jack stands. Ensure the vehicle is stable before proceeding.
Step 3: Remove the Wheels
Remove the lug nuts completely and take off the wheels to access the suspension components.
Step 4: Remove the Stock Springs
To remove the stock springs, you will need to disconnect the strut assembly. This usually involves:
- Removing the top strut bolts.
- Disconnecting any sway bar links.
- Removing the lower strut bolts.
Once the strut assembly is free, carefully compress the springs using spring compressors and remove them from the strut.
Step 5: Install the Nismo Lowering Springs
Place the Nismo lowering springs onto the strut assembly. Ensure they are seated correctly and remove the spring compressors.
Step 6: Reinstall the Strut Assembly
Reattach the strut assembly to the vehicle. Make sure to torque the bolts to the manufacturer’s specifications for safety.
Step 7: Reinstall the Wheels
Put the wheels back on and hand-tighten the lug nuts. Lower the vehicle back to the ground before fully tightening the lug nuts in a crisscross pattern.
Step 8: Final Checks
Once the installation is complete, check the alignment and ensure that all components are secure. It’s advisable to get a professional alignment done after lowering your vehicle.
Conclusion
Installing a Nismo lowering kit on your Q50 Red Sport can significantly enhance both its appearance and performance. By following these steps, you can achieve a better stance and improved handling. Always remember to prioritize safety and consider seeking professional help if you are unsure about any part of the installation process.