Table of Contents
The Nissan Q50 VR30DDTT is a popular choice among car enthusiasts looking to enhance their vehicle’s performance. One of the most effective modifications for improving ride quality and handling is the installation of coilovers. In this article, we will discuss the benefits of BC Racing coilovers and provide a step-by-step guide to installing them on your Q50.
Benefits of BC Racing Coilovers
BC Racing coilovers are known for their quality and performance. Here are some key benefits of upgrading to BC Racing coilovers for your Q50:
- Improved Handling: Coilovers provide better suspension geometry, which enhances cornering and stability.
- Adjustable Height: You can lower or raise your vehicle to achieve the desired stance and ride height.
- Customizable Damping: BC Racing coilovers allow you to adjust the dampening settings to suit your driving style.
- Durability: Built with high-quality materials, these coilovers are designed to withstand harsh driving conditions.
- Enhanced Aesthetics: Lowering your vehicle improves its appearance and gives it a more aggressive stance.
Tools and Materials Needed
Before starting the installation, gather the necessary tools and materials:
- BC Racing Coilovers
- Jack and Jack Stands
- Socket Set
- Wrench Set
- Spring Compressors
- Torque Wrench
- Penetrating Oil
- Safety Glasses
- Gloves
Step-by-Step Installation Guide
1. Prepare Your Vehicle
Start by parking your Q50 on a flat surface. Engage the parking brake and wear safety glasses and gloves. Loosen the lug nuts on the front wheels slightly, but do not remove them yet.
2. Lift the Vehicle
Using a jack, lift the front of the vehicle and secure it with jack stands. Ensure the vehicle is stable before proceeding.
3. Remove the Front Wheels
Now, remove the lug nuts completely and take off the front wheels. This will give you access to the suspension components.
4. Remove the Factory Struts
Locate the top strut bolts under the hood and the lower strut bolts at the wheel assembly. Apply penetrating oil to the bolts if they are rusted. Remove the bolts using the appropriate socket and wrench.
5. Compress the Springs
Using spring compressors, carefully compress the factory springs to relieve tension. Once compressed, remove the top mount and any other components securing the strut assembly.
6. Install BC Racing Coilovers
Position the BC Racing coilover in place of the factory strut. Ensure that the mounting points align correctly. Reinstall the top mount and secure it with the provided hardware.
7. Adjust Ride Height
Before tightening everything, adjust the ride height to your preference. Make sure both coilovers are set to the same height for balanced handling.
8. Reinstall the Wheels
Once the coilovers are installed and adjusted, reinstall the front wheels. Tighten the lug nuts by hand.
9. Lower the Vehicle
Carefully lower the vehicle back to the ground using the jack. Once on the ground, use a torque wrench to tighten the lug nuts to the manufacturer’s specifications.
10. Test Drive and Adjust
Take your Q50 for a test drive to evaluate the new suspension setup. Pay attention to ride quality and handling. If necessary, make further adjustments to the damping settings and ride height.
Conclusion
Installing BC Racing coilovers on your Q50 VR30DDTT is a great way to enhance both ride quality and handling. With adjustable height and damping options, these coilovers provide a customizable driving experience. Follow the steps outlined in this guide for a successful installation and enjoy the improved performance of your vehicle.