Table of Contents
Installing a NOS nitrous system can significantly enhance your vehicle’s performance on the quarter mile. This guide will walk you through the process of installing a $1,200 NOS nitrous system step-by-step, ensuring you get the most out of your setup.
Tools and Materials Needed
- NOS nitrous system kit
- Socket set
- Wrenches
- Drill with bits
- Safety goggles
- Gloves
- Fuel line
- Electrical tape
- Wire connectors
Preparation
Before starting the installation, ensure that you have all the necessary tools and materials. Read through the NOS nitrous system manual thoroughly to familiarize yourself with the components and installation instructions.
Make sure your vehicle is in a well-ventilated area and that you have safety equipment on hand. Disconnect the battery to prevent any electrical issues during installation.
Step 1: Mounting the Nitrous Bottle
Locate a suitable position in your trunk or cargo area to mount the nitrous bottle. It should be secure and easily accessible for refilling.
Using the provided brackets, mark the drill points for mounting. Drill holes and secure the bottle in place with bolts.
Step 2: Installing the Nitrous Lines
Run the nitrous lines from the bottle to the engine compartment. Ensure that the lines are not exposed to heat sources or moving parts.
Secure the lines using zip ties or clamps to prevent any movement during operation.
Step 3: Connecting the Nitrous Solenoid
Locate the nitrous solenoid and mount it in the engine compartment. Ensure it is positioned in a way that allows for easy access and connection to the nitrous lines.
Connect the nitrous lines to the solenoid, ensuring they are tightened securely to prevent leaks.
Step 4: Fuel System Integration
To ensure optimal performance, the nitrous system must be integrated with the fuel system. Locate the fuel line and install the fuel solenoid as per the instructions provided in the kit.
Connect the fuel line to the solenoid and ensure it is secure. This step is crucial as it allows the nitrous and fuel to mix properly for combustion.
Step 5: Electrical Connections
Connect the electrical wiring for both the nitrous and fuel solenoids. Follow the wiring diagram provided in the NOS kit to ensure correct connections.
Use electrical tape and wire connectors to secure all connections, preventing any potential short circuits.
Step 6: Installing the Activation Switch
Choose a location for the activation switch that is easily accessible while driving. Drill a hole and mount the switch securely.
Connect the switch to the electrical system according to the provided instructions. Ensure that it is functioning correctly before proceeding.
Step 7: Final Checks
Once all components are installed, double-check all connections, mounts, and lines for security. Make sure there are no leaks in the nitrous or fuel lines.
Reconnect the battery and perform a test activation of the nitrous system to ensure everything is functioning properly.
Step 8: Testing and Tuning
After installation, take your vehicle to a safe and controlled environment for testing. Monitor the performance and make any necessary adjustments to the fuel and nitrous settings.
Consult with a professional if you are unsure about any adjustments or if you encounter issues during testing.
Safety Precautions
Always prioritize safety when working with nitrous systems. Wear protective gear and work in a well-ventilated area. Ensure that you understand the operation of the nitrous system before use.
Keep a fire extinguisher nearby and be aware of the risks associated with nitrous oxide.
Conclusion
Installing a $1,200 NOS nitrous system can enhance your vehicle’s performance significantly. By following this step-by-step guide, you can ensure a successful installation and enjoy the benefits of increased power on the quarter mile.