Table of Contents
The Ram 1500 is a powerful truck, but if you’re looking to take its performance to the next level, installing a supercharger kit is an excellent option. The ProCharger 2.9L supercharger kit is designed to significantly boost your truck’s horsepower and torque. In this guide, we will walk you through the installation process step by step.
What You Will Need
- ProCharger 2.9L Supercharger Kit
- Basic hand tools (wrenches, sockets, screwdrivers)
- Torque wrench
- Jack and jack stands
- Coolant and oil
- Safety goggles and gloves
Preparation
Before you begin the installation, it is crucial to prepare your workspace and gather all necessary tools and components. Make sure your Ram 1500 is parked on a flat surface, and the engine is cool to the touch.
Step 1: Disconnect the Battery
Start by disconnecting the negative terminal of the battery to prevent any electrical shorts during the installation.
Step 2: Remove the Stock Intake System
Next, remove the factory air intake system. This typically involves loosening clamps and disconnecting sensors. Keep all hardware for reinstallation.
Installing the ProCharger 2.9L Supercharger Kit
With the stock intake removed, you can now begin the installation of the ProCharger supercharger kit.
Step 3: Install the Supercharger Bracket
Follow the manufacturer’s instructions to install the supercharger bracket onto the engine. Ensure it is securely fastened using the provided bolts.
Step 4: Mount the Supercharger
Carefully mount the ProCharger supercharger onto the bracket, ensuring the drive pulley is aligned properly. Tighten all bolts to the specified torque settings.
Step 5: Install the Intercooler
Install the intercooler in the designated location. Connect the necessary piping and ensure all connections are tight to prevent leaks.
Step 6: Connect the Intake System
Reinstall the intake system, connecting it to the supercharger. Make sure all clamps and sensors are properly reconnected.
Final Steps
After the supercharger is installed, there are a few final steps to complete before hitting the road.
Step 7: Reconnect the Battery
Reconnect the negative terminal of the battery and ensure all electrical connections are secure.
Step 8: Check Fluid Levels
Check the engine oil and coolant levels, topping off if necessary. This ensures your engine runs smoothly with the added boost.
Step 9: Start the Engine
Start the engine and let it idle for a few minutes. Listen for any unusual sounds and check for leaks around the supercharger and intercooler.
Step 10: Test Drive
Finally, take your Ram 1500 for a test drive. Gradually increase speed to ensure everything is functioning correctly. Enjoy the enhanced performance!
Conclusion
Installing a ProCharger 2.9L supercharger kit on your Ram 1500 can significantly enhance its performance. By following this guide, you can boost your truck’s power and enjoy a more exhilarating driving experience.